Need help with KWA KM4A1 .

KND · August 8th, 2008, 12:39

Hi ! I just bought this gun about 1 months ago but it broke after 500 shot. hahaha very funny. Look like, I never get luck with M4A1 gun, this is my second AR that broke just only 500 rounds. Anyway, Here we go the story :

This morning, I just want to test the gun to make sure everything perfect before go the game , but after 30 rounds, the gun suddenly stop working but the motor still running because I can hear the sound of it. The gearbox doesn't work at all, just only motor. So I decide to take out the motor to find out what happen again. I took it out, I saw one piece of gear tongue inside the mechbox. So I took it out and take picture asking you guy what is that piece come from ?

I want to open the mechbox but the I can't take it out from the lower receiver, there is one pin above the trigger but I can't take it out. Any suggestion will be appreciate ? Thanks.

Now, I'm so tired of fixing the gun anymore and I have to leave the country next two or three day. So I'm looking a gunsmith in Montreal that I can leave the gun too. Thanks.

dpvu · August 8th, 2008, 12:47

The pin above the trigger can be punched out with a pin or a small screwdriver and a hammer.

KND · August 8th, 2008, 13:15

Now I found out the problem now, the piece that borke is from the sector gear.

BORDENSNIPER · August 8th, 2008, 13:18

wow that retarded, are u running a lipo on that? how did it break? did u modify internals or was it broken from factory?

dpvu · August 8th, 2008, 13:23

Luckily, sector gears aren't hard to find and are fairly cheap. Just get a new one, shim and you're good to go again.

The Saint · August 8th, 2008, 13:31

Quote:

Originally Posted by dpvu

The pin above the trigger can be punched out with a pin or a small screwdriver and a hammer.

And the pin only punches out one way. You have to figure out which way it went in.

KND · August 8th, 2008, 13:31

I didn't modify it yet and I'm running Lipo.

Thanks dpvu, I just wonder how about this Marui Sector Gear on airsoftparst.

Will it fit on that mechbox ?

Here is the Link :

http://www.airsoftparts.ca/store2/in...roducts_id=584

Thanks in advance.

Cheers !
KND

Quote:

Originally Posted by dpvu

Luckily, sector gears aren't hard to find and are fairly cheap. Just get a new one, shim and you're good to go again.

eV.Viper · August 8th, 2008, 13:38

Hum, I don't think marui will be able to handle lipo :/ It may, be it may broke too.

Maybe some reinforced gears will help !

BORDENSNIPER · August 8th, 2008, 13:42

for one thing, do not use lipo it wll kill ur gun much faster than a traditional battery pack.

secondly get a reinforced gear as someone said, marui gear will shred.

Trader rating · August 8th, 2008, 13:46

I would shoot a email to KWA they have been very good with dealing with defects stateside, im sure they could mail you the parts. These guns are lipo rated so you should be able to use that if you wish.

TriChrome · August 8th, 2008, 13:54

Quote:

Originally Posted by pawscal

These guns are lipo rated so you should be able to use that if you wish.

They're not really lipo rated to the degree everybody thinks.

KWA says that the most powerful LiPo that can be used safely in their guns has a maximum discharge rate of 18 amps. That's absolutely nothing in the Li-Poly world... considering a Ni-Mh battery can output more than 30 amps without problem.

BORDENSNIPER · August 8th, 2008, 13:57

just because it says lipo ready, doesnt mean u can abuse it with lipo, its not even realistic, the fire rate. switch to normal batteries, if u want to install lipo, u ahve to buy better reinforced gear set, modify tappet plate, rewire with 14awg wire, have a 16a fuse, max 20a.

use noraml abtteries, using lipo will cause u way too many problems in the future.

Shirley · August 8th, 2008, 14:15

Wow wtf.. LOL
Don't hate on AR's now

KND · August 8th, 2008, 14:27

Quote:

Originally Posted by Mr.Hitman

Don't hate on AR's now

I swear from now on, I won't buy any AR anymore but If I want AR, I will buy the PTW instead of that creepy KWA and G&P.

My first gun is custom G&P, I put the new in box G&P gearbox and just only about 600 rounds, it's broke. Do you think it's funny ? now my second AR is happen the same.

so tired now, my next gun might be PTW.

WARFIGHTER · August 8th, 2008, 14:36

Don't get too discouraged, I've gone through about 6 m4's in the past 4 years or so, 3 of them have been perfect no issues stock, 3 broke after a few rounds and needed replacement parts, all were brand new...

The QC on most airsoft mfg's seems to be iffy to me.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 8th, 2008, 12:47	#2
dpvu Trader rating Join Date: Mar 2008 Location: Calgary	The pin above the trigger can be punched out with a pin or a small screwdriver and a hammer. __________________ JG HK416 KWA USP

August 8th, 2008, 13:15	#3
KND * AV revoked * Trader rating Join Date: Apr 2008 Location: Downtown Montreal	Now I found out the problem now, the piece that borke is from the sector gear. __________________

August 8th, 2008, 13:23	#5
dpvu Trader rating Join Date: Mar 2008 Location: Calgary	Luckily, sector gears aren't hard to find and are fairly cheap. Just get a new one, shim and you're good to go again. __________________ JG HK416 KWA USP

August 8th, 2008, 13:18	#4
BORDENSNIPER Trader rating Join Date: Feb 2005	wow that retarded, are u running a lipo on that? how did it break? did u modify internals or was it broken from factory?

August 8th, 2008, 13:38	#8
eV.Viper Trader rating Join Date: Jun 2006 Location: Montreal, Quebec	Hum, I don't think marui will be able to handle lipo :/ It may, be it may broke too. Maybe some reinforced gears will help ! __________________ Aka Raptor TM M3 Shorty KJW Beretta M9

August 8th, 2008, 13:42	#9
BORDENSNIPER Trader rating Join Date: Feb 2005	for one thing, do not use lipo it wll kill ur gun much faster than a traditional battery pack. secondly get a reinforced gear as someone said, marui gear will shred.

August 8th, 2008, 13:46	#10
pawscal Guest Trader rating	I would shoot a email to KWA they have been very good with dealing with defects stateside, im sure they could mail you the parts. These guns are lipo rated so you should be able to use that if you wish.

August 8th, 2008, 13:57	#12
BORDENSNIPER Trader rating Join Date: Feb 2005	just because it says lipo ready, doesnt mean u can abuse it with lipo, its not even realistic, the fire rate. switch to normal batteries, if u want to install lipo, u ahve to buy better reinforced gear set, modify tappet plate, rewire with 14awg wire, have a 16a fuse, max 20a. use noraml abtteries, using lipo will cause u way too many problems in the future.

August 8th, 2008, 14:15	#13
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Wow wtf.. LOL Don't hate on AR's now __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

August 8th, 2008, 14:36	#15
WARFIGHTER formerly Knyte Trader rating Join Date: Apr 2005 Location: Manitoba	Don't get too discouraged, I've gone through about 6 m4's in the past 4 years or so, 3 of them have been perfect no issues stock, 3 broke after a few rounds and needed replacement parts, all were brand new... The QC on most airsoft mfg's seems to be iffy to me. __________________

Need help with KWA KM4A1 .

Upgrades & Modifications