KSC G23F Manual

[Qlong]

Again, my last resort creating a thread to ask all you nice folks if there is a manual scan for the KSC G23F? I'm actually trying to adjust the rear sight.

Thanks

[Qlong]

FOUND!!! after 23min ...by accident

Still don't know how to adjust sights tho

[Styrak]

Don't think you can adjust sights on Glocks.

[Qlong]

If thats true, then thats retarded.

Bah, mine shoots 4inch consistently to the left at 30 ft.

[Wilson]

Rear sight on a Glock does not adjust.

[Qlong]

Alright, thanks for the confirmation, does it at least move side to side or detach? I know the front does.

[Styrak]

Originally Posted by Qlong

Alright, thanks for the confirmation, does it at least move side to side or detach? I know the front does.

Real steel don't shoot 4 inches to the left at 30 feet, so you don't have to adjust them

And the sight can detach, but that means unscrewing a screw that connects the sight to the slide internals. And that screw keeps the slide internals in place.

EDIT: Wait a second I was thinking of TM's and KJW's. On a KSC you should be able to adjust the rear sight side to side because KSC uses an internal screw to keep the internals in place. Just tap it to the side. Might stick out a bit on one side though, depending on how much you need to adjust it.

[Steve_U1S]

You're completely wrong - the rear sight can be drifted as much as you please. Just needs some controlled taps - often carefully applied side-of-knuckle pressure can get them moving.
There's no lock screw on there at all. It covers the set screw that holds the retainer pin for the fire-mode selector lever, and hides the brass threaded insert which is the receiver for the blowback chamber from inside the slide.

Trust me on this - I own 5 KSC Glocks, 2 of which are G23Fs.

[Styrak]

Yeah I just realized I was thinking of the wrong gun and changed my post.

[Qlong]

Ah, thank you kinds sirs. Some controlled taps did the trick.