My custom Silencer on a TM P226

Kos-Mos · December 14th, 2006, 02:44

Last week my handgun felt on the ground. The outer barrel cracked then and the inner barrel was moving a bit.

I decided that I would fix this and by the same time, build a silencer, just for the look.

So here is what it gave..

*edit* I have used this gun tonight at the paintball field...It is preaty accurate! Even compared to before the break! The brass coupling I used to make the treads and holding the inner barrel is tighter around it, so the shots are a lot more consistent!

Before painting:

After painting:

Sorry, the pictures are not done yet... will have to wait!

Kanyon · December 14th, 2006, 02:46

Will definitely look better when its painted.

Otherwise, you can use the 226 in the bathroom as a toilet paper dispensor.

Pretty cool though

GMTII · December 14th, 2006, 03:13

1

Kos-Mos · December 14th, 2006, 13:30

Pictures or the final product!

Renegade) · December 14th, 2006, 14:04

Very nice work man, I like it!

Lord_Jeremiah · December 14th, 2006, 15:37

Very well done!

If you don't mind me asking, what thread size did you use for the silencer/ outer barrel?

Kanyon · December 14th, 2006, 18:49

Very nice

Kos-Mos · December 15th, 2006, 01:25

I don't exactly know...

Just brough the outer/inner barrels at Home Depot and looked for something nice.

I used some brass couplings for pipes. They fit perfectly the inner barrel and are about the same size as outer barrel (just a bit larger, does not appear when the slide is in place.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 14th, 2006, 02:44	#1
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	My custom Silencer on a TM P226 Last week my handgun felt on the ground. The outer barrel cracked then and the inner barrel was moving a bit. I decided that I would fix this and by the same time, build a silencer, just for the look. So here is what it gave.. edit I have used this gun tonight at the paintball field...It is preaty accurate! Even compared to before the break! The brass coupling I used to make the treads and holding the inner barrel is tighter around it, so the shots are a lot more consistent! Before painting: After painting: Sorry, the pictures are not done yet... will have to wait! Last edited by Kos-Mos; December 14th, 2006 at 02:49..

December 14th, 2006, 02:46	#2
Kanyon Trader rating Join Date: May 2005 Location: Markham, Ontario	Will definitely look better when its painted. Otherwise, you can use the 226 in the bathroom as a toilet paper dispensor. Pretty cool though __________________ The great state of Vermont will not apologize for its cheese!

December 14th, 2006, 03:13	#3
GMTII WW2 Airsofter Trader rating Join Date: Jun 2004	1 __________________ I can't measure my sig so I got this stupid tag line instead. Last edited by GMTII; May 11th, 2012 at 15:29..

December 14th, 2006, 13:30	#4
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	Pictures or the final product!

December 14th, 2006, 14:04	#5
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Very nice work man, I like it! __________________ W1-5

December 14th, 2006, 15:37	#6
Lord_Jeremiah Trader rating Join Date: Apr 2006 Location: Sylvan Lake	Very well done! If you don't mind me asking, what thread size did you use for the silencer/ outer barrel?

December 14th, 2006, 18:49	#7
Kanyon Trader rating Join Date: May 2005 Location: Markham, Ontario	Very nice __________________ The great state of Vermont will not apologize for its cheese!

December 15th, 2006, 01:25	#8
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	I don't exactly know... Just brough the outer/inner barrels at Home Depot and looked for something nice. I used some brass couplings for pipes. They fit perfectly the inner barrel and are about the same size as outer barrel (just a bit larger, does not appear when the slide is in place.

My custom Silencer on a TM P226

Upgrades & Modifications