HK11E mod

morsredigo · December 10th, 2006, 23:48

theres a handful of people with "HK11"s and "HK21"s, and i commend you on getting as close as you could without a conversion kit being out there
I decided to order a tightbore, but my gun didnt have the 3 inch extension at the end so instead of ordering one i decided to build myself a conversion kit
not fully completed, but its operational and scaaaaryyyy

CA light metal body
TM stock SG1 stock (upgrading to MSG90 stock)
shortened stock TM inner barrel (upgrading to prometheus 6.03 469mm)
guarder reinforced gearbox
upgraded gears, shims, PDI 120 spring
currently shooting 368 fps at 840rpm
i hope to get it 380 fps at 800rpm

custom milled by ThunderCactus on Manitoba Airsoft Association boards
more action pics to come by february

whoha · December 29th, 2006, 01:10

Is thing now not to heavy???

morsredigo · December 30th, 2006, 00:34

its almost all steel, H&K should lend me a deactivated HK11E to compare the weight
so once i get the depleted uranium stock, the tree in my front yard is coming down

-ThunderCactus

Red Ghost · December 30th, 2006, 00:48

Badass. Muchos Badass.

Kudos to you.

JOHNUSA · January 19th, 2007, 23:55

here are some pics of my hk21 project still some minor details to cover.

its a tm sg1 fit with

msg90 stock
gp ras front end with horizontal

grip and heat sheilds
there is a hero arms g3 mag covered in a ammo bag with fake ammo coming from the side.
internal mods in clude g3 ftk kit
reinforced gearbox
spare motors

and one big mother trucking battery

http://youngstownpub.com/hk21.html

here is a link to the pictures.

enjoy. comments welcome.

H.N.I.C.

ThunderCactus · February 13th, 2007, 22:37

YES MAN!!! AWESOME!!! =D

ThunderCactus · February 23rd, 2007, 14:03

new pics up!
drum mag is in neepawa
upgrading to PSG1 stock with custom large battery
added low profile rail
adding custom NVD/scope rail
buying a 2x scope
and still waiting for a real steel M249 bipod

gamz · February 23rd, 2007, 14:10

Very nice. Where did you get the heat guards?

ThunderCactus · February 23rd, 2007, 18:05

i made them
everything between the end of the receiver and the flash hider is 100% custom
theres a few things i left out for lack of time to do them, and the bipod mount i just couldn't have made so im just buying an M249 bipod and tig welding it on

Mud Gunner · February 23rd, 2007, 18:18

Nice work! Wish I had the access to the tools that some fo the guys here do to create their "wunderguns". Save me a fortune it would :P

ThunderCactus · February 24th, 2007, 00:42

i wish i had consistent access to a mill and a lathe, then i could make tons of cool stuff

mateba · February 26th, 2007, 19:02

I have to admit that is one sexy G3. Good Work! I like the foregrip. What are you ideas for a magazine? c-mag or drum? I would recomend a 1.5x-4.5 scope though. My 2x can be a bit much sometimes.

ThunderCactus · February 26th, 2007, 19:28

hero arms G3 drum magazine, my friend had an LMG36 and i really cant stand the Cmags.The 2x is just a personal preference, i dont like losing alot peripheral vision, especially as an LMG i dont need to pinpoint shots; i need to supress anyone poking their head out, but I'll see how it goes in the field.
i have a photoshopped image of it with a PSG1 stock on it and it looks pretty awesome. I'll post it as soon as i can.

ThunderCactus · April 12th, 2007, 20:17

just putting the pics back up...

ThunderCactus · September 9th, 2007, 20:31

old thread lol
new pics up, this is only the 3rd time i've used this thing in a game i think lol

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 10th, 2006, 23:48	#1
morsredigo Trader rating Join Date: Feb 2004 Location: Winnipeg	HK11E mod theres a handful of people with "HK11"s and "HK21"s, and i commend you on getting as close as you could without a conversion kit being out there I decided to order a tightbore, but my gun didnt have the 3 inch extension at the end so instead of ordering one i decided to build myself a conversion kit not fully completed, but its operational and scaaaaryyyy CA light metal body TM stock SG1 stock (upgrading to MSG90 stock) shortened stock TM inner barrel (upgrading to prometheus 6.03 469mm) guarder reinforced gearbox upgraded gears, shims, PDI 120 spring currently shooting 368 fps at 840rpm i hope to get it 380 fps at 800rpm custom milled by ThunderCactus on Manitoba Airsoft Association boards more action pics to come by february Last edited by morsredigo; February 5th, 2007 at 21:44..

December 29th, 2006, 01:10	#2
whoha Banned Trader rating Join Date: Dec 2005 Location: Neepawa	too heavy Is thing now not to heavy???

December 30th, 2006, 00:48	#4
Red Ghost Trader rating Join Date: Dec 2004 Location: The Ambush You're About To Enter	Badass. Muchos Badass. Kudos to you. __________________ TM SR-16 Stock, And A Shitload Of Mags Apparently, a hand grenade does not belong in my toolbox. Nor does a hand grenade with the pin pulled belong in someone else's toolbox. When In Doubt, Empty A Magazine.

December 30th, 2006, 00:34	#3
morsredigo Trader rating Join Date: Feb 2004 Location: Winnipeg	its almost all steel, H&K should lend me a deactivated HK11E to compare the weight so once i get the depleted uranium stock, the tree in my front yard is coming down -ThunderCactus

January 19th, 2007, 23:55	#5
JOHNUSA Trader rating Join Date: Dec 2005 Location: USA OHIO YOUNGSTOWN	here are some pics of my hk21 project still some minor details to cover. its a tm sg1 fit with msg90 stock gp ras front end with horizontal grip and heat sheilds there is a hero arms g3 mag covered in a ammo bag with fake ammo coming from the side. internal mods in clude g3 ftk kit reinforced gearbox spare motors and one big mother trucking battery http://youngstownpub.com/hk21.html here is a link to the pictures. enjoy. comments welcome. H.N.I.C.

February 13th, 2007, 22:37	#6
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	YES MAN!!! AWESOME!!! =D

February 23rd, 2007, 14:03	#7
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	new pics up! drum mag is in neepawa upgrading to PSG1 stock with custom large battery added low profile rail adding custom NVD/scope rail buying a 2x scope and still waiting for a real steel M249 bipod Last edited by ThunderCactus; April 12th, 2007 at 20:16..

February 23rd, 2007, 14:10	#8
gamz Trader rating Join Date: Apr 2004 Location: Ottawa, ON \| St. John's, NL	Very nice. Where did you get the heat guards? __________________ Grenadier Weapons SRC Colt M4A1 FMU + CA Military M203 Long \| TM G3 SAS \| TM G3A3 \| KJW Beretta M9 FMU _______________________________ Ottawa Valley Airsoft

February 23rd, 2007, 18:05	#9
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	i made them everything between the end of the receiver and the flash hider is 100% custom theres a few things i left out for lack of time to do them, and the bipod mount i just couldn't have made so im just buying an M249 bipod and tig welding it on

February 23rd, 2007, 18:18	#10
Mud Gunner Trader rating Join Date: Sep 2004 Location: Edmonton	Nice work! Wish I had the access to the tools that some fo the guys here do to create their "wunderguns". Save me a fortune it would :P __________________ Proud owner of a pile of airsoft guns and kit with the credit card bills to prove it!

February 24th, 2007, 00:42	#11
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	i wish i had consistent access to a mill and a lathe, then i could make tons of cool stuff

February 26th, 2007, 19:02	#12
mateba Trader rating Join Date: Feb 2007 Location: Alabama, USA	I have to admit that is one sexy G3. Good Work! I like the foregrip. What are you ideas for a magazine? c-mag or drum? I would recomend a 1.5x-4.5 scope though. My 2x can be a bit much sometimes. Last edited by mateba; February 26th, 2007 at 19:04..

February 26th, 2007, 19:28	#13
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	hero arms G3 drum magazine, my friend had an LMG36 and i really cant stand the Cmags.The 2x is just a personal preference, i dont like losing alot peripheral vision, especially as an LMG i dont need to pinpoint shots; i need to supress anyone poking their head out, but I'll see how it goes in the field. i have a photoshopped image of it with a PSG1 stock on it and it looks pretty awesome. I'll post it as soon as i can.

April 12th, 2007, 20:17	#14
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	just putting the pics back up...

September 9th, 2007, 20:31	#15
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	old thread lol new pics up, this is only the 3rd time i've used this thing in a game i think lol

HK11E mod

Upgrades & Modifications