AK74m Tear Down Guide

Myrrlyn · May 1st, 2006, 10:31

I was wondering if anyone knows of a good ICS AK74m teardown guide?
If you do, can you post the link?
Thanx

mcguyver · May 1st, 2006, 19:52

http://www.airsoftcanada.com/showthr...055#post330055

If you follow that initial review, you'll find the photos do as much of a teardown as you'll ever need. You can pm me if you need more info than what the photos say.

Myrrlyn · May 2nd, 2006, 10:34

Thanks. I went ahead and did a teardown myself and I didnt find it that complicated. Anyone doing a teardown should be told to do it with a large open space, I found some springs and lock washers on my bench.

One thing I noticed was a tendancy for the auto/semi selector switch to slip down on occasion. I fixed this by removing the switch and placing a rubber washer underneath and putting the switch back on. Stiff but compliant at the same time.

Also, one of the butt stock tabs was broken off when I recieved it (no blame) and I was wondering about the best way to fix it would be. It doesnt seem to affect the rifle at all (as I took it out with the tab off), but I would like to repair it if possible.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 1st, 2006, 10:31	#1
Myrrlyn Trader rating Join Date: Apr 2006 Location: Moose Jaw, Saskatchewan	AK74m Tear Down Guide I was wondering if anyone knows of a good ICS AK74m teardown guide? If you do, can you post the link? Thanx

May 1st, 2006, 19:52	#2
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	http://www.airsoftcanada.com/showthr...055#post330055 If you follow that initial review, you'll find the photos do as much of a teardown as you'll ever need. You can pm me if you need more info than what the photos say. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

May 2nd, 2006, 10:34	#3
Myrrlyn Trader rating Join Date: Apr 2006 Location: Moose Jaw, Saskatchewan	Thanks. I went ahead and did a teardown myself and I didnt find it that complicated. Anyone doing a teardown should be told to do it with a large open space, I found some springs and lock washers on my bench. One thing I noticed was a tendancy for the auto/semi selector switch to slip down on occasion. I fixed this by removing the switch and placing a rubber washer underneath and putting the switch back on. Stiff but compliant at the same time. Also, one of the butt stock tabs was broken off when I recieved it (no blame) and I was wondering about the best way to fix it would be. It doesnt seem to affect the rifle at all (as I took it out with the tab off), but I would like to repair it if possible.

AK74m Tear Down Guide

Airsoft Guns Discussion