we g39 npas info/eta/anything?

hattrick · March 8th, 2011, 18:04

Anyone have word on when/if/where this is comming out?

thanks - alex

theguy · March 8th, 2011, 18:11

http://www.airsoftparts.ca/store2/in...oducts_id=2047

Would that work? Says for open-bolt WE rifles.

Ross · March 8th, 2011, 18:11

I thought the open bolt npas was for all open bolt guns? I hope anyway.

hattrick · March 8th, 2011, 19:10

On the ra-tech site, it says that unit is for the pdw...different nozzle ?

*edit I may be so0o00o wrong. Tyson get yer ass in here and gimme some info!

Invasian · March 8th, 2011, 19:18

.

Invasian · March 8th, 2011, 19:18

i made the mistake of buying this for it...as per one of my gundocs it will NOT work...you need the PDW NPAS for the CLOSED BOLT version.

Quote:

Originally Posted by theguy

http://www.airsoftparts.ca/store2/in...oducts_id=2047

Would that work? Says for open-bolt WE rifles.

hattrick · March 8th, 2011, 19:25

Thats even more confusing.

Your telling me I need a closed bolt npas for the pdw series....for my g39?

-alex

m102404 · March 8th, 2011, 19:30

LOL...stop calling me on the Internet...it's dinnertime and I have a steak on the grill right now.

The theory behind it is that the float valve...similar to a hicapa or 226 valve...is moved forward or back changing it's timing on how quick it switches over to recoil cycle.

So...basically if the valve fits the nozzle body and seals well...it should work.

Frankly...I haven't looked at the G39 nozzle insides to mic it out and measure what's what.

I think G36/39 mags are ugly and a PITA....so really don't have much interest in that model.

If you want...I can take a look at it and just make a valve for you. It's be neat to turn it on the lathe as a weekend project.

Tys

hattrick · March 8th, 2011, 19:39

Yay, my hero!

-alex

Carlito564 · March 8th, 2011, 23:17

I was told to buy the open bolt NPAS and follow the install instructions for the M14. I still haven't tried it because it hasn't arrived but from looking at other forums, it seems that following the instructions for the M14 open-bolt installation works just fine.

Ross · March 8th, 2011, 23:25

you can just email ra tech and ask. They usually answer if it means a profit for them.

Amos · March 8th, 2011, 23:39

Quote:

Originally Posted by Invasian

i made the mistake of buying this for it...as per one of my gundocs it will NOT work...you need the PDW NPAS for the CLOSED BOLT version.

Your Gundoc is dead wrong.

That is the NPAS for the WE G39. The WE G39 is an OPEN BOLT SYSTEM gun.

Ninja_En_Short · March 9th, 2011, 00:26

Hum, Invasian you mixed up what I said, you had the closed bolt one which I could not put in the G39.

I just installed two open bolt in yours and mine, shoots 410/420 fps completely open.

For installation you have to file too small bits in the nozzle on which the NPAS presses. If not the power is not even 300 fps with 23°C.

Same NPAS for PDW, M14, G39 and probably for open bolt SCAR and M4, haven't tried yet.

Invasian · March 9th, 2011, 17:07

my bad. I stand corrected.

sorry for the confusion.

Quote:

Originally Posted by Ninja_En_Short

Hum, Invasian you mixed up what I said, you had the closed bolt one which I could not put in the G39.

I just installed two open bolt in yours and mine, shoots 410/420 fps completely open.

For installation you have to file too small bits in the nozzle on which the NPAS presses. If not the power is not even 300 fps with 23°C.

Same NPAS for PDW, M14, G39 and probably for open bolt SCAR and M4, haven't tried yet.

teriases · March 9th, 2011, 19:16

I was under the impression that the NPAS isn't available yet for the G39 models from RA tech. They have a custom G39 for sell with build in nPAS but the individual unit isn't for sell yet.

As to some of you moding existing parts to fit... That isn't the part made for the gun if u have to file down parts... But it'll work granted.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 8th, 2011, 18:11	#3
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	I thought the open bolt npas was for all open bolt guns? I hope anyway. __________________

March 8th, 2011, 23:17	#10
Carlito564 Trader rating Join Date: Sep 2010 Location: Sudbury, Ontario	I was told to buy the open bolt NPAS and follow the install instructions for the M14. I still haven't tried it because it hasn't arrived but from looking at other forums, it seems that following the instructions for the M14 open-bolt installation works just fine. __________________ Molon Labe

March 8th, 2011, 23:25	#11
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	you can just email ra tech and ask. They usually answer if it means a profit for them. __________________

March 8th, 2011, 19:18	#5
Invasian Likes it BOLD attention whore MAXIMUS! Trader rating Join Date: May 2006 Location: Mtl	.

March 8th, 2011, 19:30	#8
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	LOL...stop calling me on the Internet...it's dinnertime and I have a steak on the grill right now. The theory behind it is that the float valve...similar to a hicapa or 226 valve...is moved forward or back changing it's timing on how quick it switches over to recoil cycle. So...basically if the valve fits the nozzle body and seals well...it should work. Frankly...I haven't looked at the G39 nozzle insides to mic it out and measure what's what. I think G36/39 mags are ugly and a PITA....so really don't have much interest in that model. If you want...I can take a look at it and just make a valve for you. It's be neat to turn it on the lathe as a weekend project. Tys

March 9th, 2011, 00:26	#13
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	Hum, Invasian you mixed up what I said, you had the closed bolt one which I could not put in the G39. I just installed two open bolt in yours and mine, shoots 410/420 fps completely open. For installation you have to file too small bits in the nozzle on which the NPAS presses. If not the power is not even 300 fps with 23°C. Same NPAS for PDW, M14, G39 and probably for open bolt SCAR and M4, haven't tried yet. __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)

March 9th, 2011, 19:16	#15
teriases Trader rating Join Date: Apr 2010 Location: Missisauga, Ontario	I was under the impression that the NPAS isn't available yet for the G39 models from RA tech. They have a custom G39 for sell with build in nPAS but the individual unit isn't for sell yet. As to some of you moding existing parts to fit... That isn't the part made for the gun if u have to file down parts... But it'll work granted.

we g39 npas info/eta/anything?

Airsoft Guns Discussion