Opinion on Traps in Airsoft

lemegacool · March 14th, 2009, 22:22

if you have questions on what's on unconventionnal airsoft you can contact DONP he is on these boards, he is also selling the trigger master cpu

spl01t77 · March 14th, 2009, 22:29

someone say spluge??? well since i'm here if anyone needs someone to walk into a couple of these give me a shout, i'm cheap like a x-large 3 sugar timmies cheap... ok back to lurking, best of luck to you all

Ronan · March 14th, 2009, 22:39

Put a couple beer cans on the ground in the middle of the road/path.
Wait on the side with a LMG.
???
Profit.

Also works on CDN_Stalker

Huron · March 15th, 2009, 00:49

^ Sigged.

Traps would work great for stealthy players too, especially snipers, so they could take down approaching enemies without giving away their position. It would definitely add a lot to a game to have to be aware of tripwires all the time.

mcguyver · March 15th, 2009, 00:57

M203 traps already exist:

http://www.wgcshop.com/pcart/shopper...II_cat_Airsoft

Staverous · March 15th, 2009, 11:33

I did know about that, I found it what I was looking for ideas, but it is also relatively expensive. I can make one without the grenade for about 20$ +/- 10$ depending on how I go about it. Also I am not sure if that one needs a specific grenade but I intend on allowing most types in mine.

Would anyone be up for an infrared tripwire?

lemegacool · March 15th, 2009, 16:08

i think you're better off with a pir sensor like the unconventionnal airsoft one , an infrared one would require a mirror on the other side to reflect the ir beam to a phototransistor, and i dont think infrared would work well on a sunny day! you could also do it using a laser and a phototransistor but you will have to align the laser very carefully with a mirror so the beam reflects on the phototransisor, then you rig a relay and a mechanical actuator to trigger the shell.

CDN_Stalker · March 15th, 2009, 16:56

Quote:

Originally Posted by Staverous

If you modded the gun to have a MOSFET trigger then you could set up a pretty easy trap to be able to do a burst or fire till empty, but yah this would work pretty good.

RICKBO:
I think I saw that one before and yah that is a great trap, with a bit of refinement it could be pretty easy and cheap to build.

MOSFET trigger to gun a GBB? LOL, priceless!!!! No, you set up the trip wire in a semi triangle fashion, so the tripwire is 90deg from the trail, goes around a tree, around another and pulls directly backwards on the trigger. Seriously, 48 rounds in 2.5 seconds, and if the tripwire is applied heavily, the gun will cant to the side, spraying 330fps BBs from one side to the other. Might only get an arc of 15-20 degrees, but still perfect.

Quote:

Originally Posted by Ronan

Put a couple beer cans on the ground in the middle of the road/path.
Wait on the side with a LMG.
???
Profit.

Also works on CDN_Stalker

Depends on the brand buddy.

Staverous · March 15th, 2009, 17:36

Quote:

Originally Posted by CDN_Stalker

MOSFET trigger to gun a GBB? LOL, priceless!!!! No, you set up the trip wire in a semi triangle fashion, so the tripwire is 90deg from the trail, goes around a tree, around another and pulls directly backwards on the trigger. Seriously, 48 rounds in 2.5 seconds, and if the tripwire is applied heavily, the gun will cant to the side, spraying 330fps BBs from one side to the other. Might only get an arc of 15-20 degrees, but still perfect.

Sorry I thought it was an AEG. But given it was an AEG the mosfet trigger would work excellent.

I am currently about half done the prototype of my M203 trap I will post pictures when it is done, so far it is looking pretty close to a sawed off M79 without the grip, heheh.

PaCHeKo! · March 15th, 2009, 17:36

Quote:

Originally Posted by CDN_Stalker

Depends on the brand buddy.

Yeah... please, don't use WildCat. Tastes like cat piss.

lemegacool · March 15th, 2009, 17:50

Quote:

Originally Posted by PaCHeKo!

Yeah... please, don't use WildCat. Tastes like cat piss.

lol but actually i dont think you would have time to taste it...

CDN_Stalker · March 15th, 2009, 18:01

Quote:

Originally Posted by Staverous

Sorry I thought it was an AEG. But given it was an AEG the mosfet trigger would work excellent.

I am currently about half done the prototype of my M203 trap I will post pictures when it is done, so far it is looking pretty close to a sawed off M79 without the grip, heheh.

M11A1 would work perfect due to the fact it's taller than it is long, fires from an open bolt, strap the grip and mag to the tree, perfect!

Staverous · March 15th, 2009, 22:00

That sounds like it would work pretty good and best of all its simple.

Ronan · March 15th, 2009, 22:07

Quote:

Originally Posted by lemegacool

lol but actually i dont think you would have time to taste it...

Exactly

johjoh · March 15th, 2009, 22:25

Quote:

Originally Posted by PaCHeKo!

Yeah... please, don't use WildCat. Tastes like cat piss.

So you actually tried cat piss?

your nasty lol

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 14th, 2009, 22:22	#31
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	if you have questions on what's on unconventionnal airsoft you can contact DONP he is on these boards, he is also selling the trigger master cpu __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry

March 14th, 2009, 22:29	#32
spl01t77 Trader rating Join Date: Jan 2008 Location: next door to the tax payer	someone say spluge??? well since i'm here if anyone needs someone to walk into a couple of these give me a shout, i'm cheap like a x-large 3 sugar timmies cheap... ok back to lurking, best of luck to you all __________________ Jake Hoyt: What's "wet"? Alonzo Harris: Butt-naked. Ill. Sherms. Dust. PCP. Primos. P-Dog. That's what you had. That's what you were smoking, you couldn't taste it?

March 15th, 2009, 00:57	#35
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	M203 traps already exist: http://www.wgcshop.com/pcart/shopper...II_cat_Airsoft __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

March 15th, 2009, 11:33	#36
Staverous Trader rating Join Date: Feb 2009 Location: Saskatoon	I did know about that, I found it what I was looking for ideas, but it is also relatively expensive. I can make one without the grenade for about 20$ +/- 10$ depending on how I go about it. Also I am not sure if that one needs a specific grenade but I intend on allowing most types in mine. Would anyone be up for an infrared tripwire?

March 15th, 2009, 16:08	#37
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	i think you're better off with a pir sensor like the unconventionnal airsoft one , an infrared one would require a mirror on the other side to reflect the ir beam to a phototransistor, and i dont think infrared would work well on a sunny day! you could also do it using a laser and a phototransistor but you will have to align the laser very carefully with a mirror so the beam reflects on the phototransisor, then you rig a relay and a mechanical actuator to trigger the shell. __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry

March 15th, 2009, 22:00	#43
Staverous Trader rating Join Date: Feb 2009 Location: Saskatoon	That sounds like it would work pretty good and best of all its simple.

Opinion on Traps in Airsoft

General