KILLZONE Helghan Assault Rifle

skalnok · September 24th, 2007, 01:43

im only posting on this because it is still on the front page, so sorry if this is against the rules

this pic might help

Cassius · September 24th, 2007, 08:51

definitely helping. *fap fap fap*

oh look, there are guns on it too...

Mr. G36! · September 24th, 2007, 09:40

Assuming you're still toying with ideas for the rifle, I have a design that could work, but it'd be pricey, and you'd have to customize a lot of the internals. Also might be a better idea to start off with a FAMAS or a Steyr AUG rather than an SL8. Nonetheless, here's what I came up with:

skalnok · September 24th, 2007, 09:40

yea i was wondering hwo would comment on that .."part" of the pictuer first lol

ABRAXAAS · September 27th, 2007, 03:35

First off no one has said this bit the easiest gun to base this off is the p90, but It would require alot of custom work.

Ozles · November 21st, 2007, 15:42

Quote:

Originally Posted by ABRAXAAS

First off no one has said this bit the easiest gun to base this off is the p90, but It would require alot of custom work.

how do you figure? i'd say the famas myself.

Ozles · May 31st, 2008, 20:39

so did this ever get built?

Zombiefruit · May 31st, 2008, 23:23

I see a shotgun at the front with the backend of a famas attached to its rear.

Drache · May 31st, 2008, 23:36

What I dont understand is WHY move the motor and internals in Mr G36's plans! Just take a SL8 and mod the body.

Raven_Shield · October 17th, 2008, 19:15

I would have to say go with a famas body and try to include g36 optics as well as a drum mag of sorts. as for the shot gun attachment find a grenade launcher it will do the bit nicely

Dusti69 · October 17th, 2008, 22:36

Quote:

Originally Posted by moderatesniper

Could you possibly mod a CA8-2 into this? Remove trigger guard, modify the stock, shorten the outer & inner barrel, add a shotty to the bottom of the foregrip and put some mold over it so that it matches? Maybe extend the carry handle (not in picture)

to

I have no idea what's metal or plastic, or if that 870 is to scale...and I have no knowledge of modding but its just a suggestion.
Most likely this would not work :P

Quote:

Originally Posted by Goldman

Why not custom resin build the body of the rifle, and build a GBB into it?

very interesting thread. very interesting gun. these are the two best ideas ive seen to make this possible. one yes take the sl-9 masterkey approach and second yes! make it gas! have it run on propane. WHY??

THIS IS WHY!!

THIS IS YOUR MAG DUDE! these can be found at walmart in sporting goods/camping for 4 dollars a tank. theyre about the perfect size too

P.S. if you liked killzone on the ps2 then check out killzone liberation on the psp. its a really good game

Roughneck · October 17th, 2008, 22:45

Looks like you could bastardize an Alien Pulse Rifle kit with a G36 to make this. Props to Moderate for the propane idea!

m102404 · October 17th, 2008, 23:57

L85 bullpup. Chopped and modded hicap mag. Rework the trigger assembly. SPAS12 under. Custom forend, cheek piece, helical mag covers. G36 carry handle chop.

How you squeeze all that cleavage into a rubber suit...don't know, but that's worth a try as well.

Good luck with the build. Don't forget a laser...I'm sure there's one in there somewhere...

Dusti69 · October 18th, 2008, 00:04

Quote:

Originally Posted by m102404

How you squeeze all that cleavage into a rubber suit...don't know, but that's worth a try as well.

who cares how they fit in there. how to get em out is what id like to know

m102404 · October 18th, 2008, 00:06

Quote:

Originally Posted by Dusti69

who cares how they fit in there. how to get em out is what id like to know

They come out when you pull the zipper down.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 24th, 2007, 08:51	#32
Cassius Trader rating Join Date: Mar 2006 Location: Montreal, Canada	definitely helping. fap fap fap oh look, there are guns on it too... __________________ WE AIN'T DEAD

May 31st, 2008, 20:39	#37
Ozles Trader rating Join Date: May 2007 Location: Kingston, Ont	so did this ever get built? __________________ Religion or Cover, on the battlefield, everyone finds something And when I vest my flashing sword And my hand takes hold in judgement, I will take vengeance upon mine enemies. I will repay those who've hased me. O Lord, raise me to thy right hand And count me among thy saints.

October 17th, 2008, 22:45	#42
Roughneck used to be Spencer aka Sue Trader rating Join Date: Oct 2007 Location: Halifax, NS	Looks like you could bastardize an Alien Pulse Rifle kit with a G36 to make this. Props to Moderate for the propane idea! __________________ Tpr. Spencer, DF RCD C Sqn - CFB Gagetown Please save for me, some gallantry That will echo when I'm gone

September 24th, 2007, 01:43	#31
skalnok Trader rating Join Date: Sep 2007 Location: barrie, ontario	im only posting on this because it is still on the front page, so sorry if this is against the rules this pic might help

September 24th, 2007, 09:40	#34
skalnok Trader rating Join Date: Sep 2007 Location: barrie, ontario	yea i was wondering hwo would comment on that .."part" of the pictuer first lol

September 27th, 2007, 03:35	#35
ABRAXAAS Trader rating Join Date: Jan 2003 Location: Vancouver	First off no one has said this bit the easiest gun to base this off is the p90, but It would require alot of custom work.

May 31st, 2008, 23:23	#38
Zombiefruit Banned Trader rating Join Date: Oct 2007 Location: Toronto, Ontario. Also in your mother's house.	I see a shotgun at the front with the backend of a famas attached to its rear.

May 31st, 2008, 23:36	#39
Drache BALLET, TYPE: SELF LOATHING, ANALBURST Trader rating Join Date: Oct 2005	What I dont understand is WHY move the motor and internals in Mr G36's plans! Just take a SL8 and mod the body.

October 17th, 2008, 19:15	#40
Raven_Shield Trader rating Join Date: Sep 2008 Location: stonewall manitoba	I would have to say go with a famas body and try to include g36 optics as well as a drum mag of sorts. as for the shot gun attachment find a grenade launcher it will do the bit nicely

October 17th, 2008, 23:57	#43
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	L85 bullpup. Chopped and modded hicap mag. Rework the trigger assembly. SPAS12 under. Custom forend, cheek piece, helical mag covers. G36 carry handle chop. How you squeeze all that cleavage into a rubber suit...don't know, but that's worth a try as well. Good luck with the build. Don't forget a laser...I'm sure there's one in there somewhere...

KILLZONE Helghan Assault Rifle

Movies/Video Games/Sci-fi