![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
The Costco Kid
|
Winter gloves
What's the main type people use of do you use them?
__________________
Type 2 airsoft player. |
![]() |
![]() |
![]() |
#2 |
|
For airsoft or general usage ? I've used my Black Diamond gloves for years during the cold season and never had a problem.
Airsoftwise, I don't use gloves since I rarely play in the winter. Oh and BTW; http://airsoftcanada.com/showthread....25#post1741925
__________________
West Coast EOD Supporter. // Bang One, Bang Em All ! // In war, it's not who's right, but who's left. Last edited by Aper; January 2nd, 2013 at 09:52.. |
![]() |
![]() |
![]() |
#3 |
If the temperature gets so low that you need to wear winter gloves, your airsoft guns won't be functional anyway. It varies plus or minus a few degrees, but the freezing point is about the operational limit of your guns.
__________________
* * * * * * * * * Rob Bye ![]() |
|
![]() |
![]() |
![]() |
#4 |
a.k.a. cloaked
|
I've been meaning to get Black Diamond gloves too, but for general use.
|
![]() |
![]() |
![]() |
#5 | |
Quote:
To the OP, the only hard part about playing in cold weather with insulated gloves is getting your finger inside the trigger guard.
__________________
Primary: ICS M16A3 RAS ICS CXP.08 Secondary: TM Glock 17 |
||
![]() |
![]() |
![]() |
#6 |
I've used my VFC HK416 in -15 degree weather and it's fired fine. The other rifles around were mostly failing from their batteries, and or from them being Co2 powered. I use Lipo's and it's good to go.
|
|
![]() |
![]() |
![]() |
#7 |
8=======D
|
Insulated work gloves are a solid choice
I have a pair of Dakota work gloves I picked up a couple of years ago.. Thinsulate and sure grip palm. when it's really cold I go for my neoprene gloves I used to wear for winter riding. they will make your hands warm and toasty even down to -15 I also have a pair of hunting mittens with a polyester glove liner. the palm is split so you can poke the hand out to do fine work and there is a sewn in handwarmer pouch. these are great for very cold situations where exposed skin will stick to steel. once it's down to -8 or so all three options go with me.
__________________
Brian McIlmoyle TTAC3 Director CAPS Range Officer Toronto Downtown Age Verifier OPERATION WOODSMAN If the tongue could cut as the sword does, the dead would be infinite |
![]() |
![]() |
![]() |
#8 |
The Costco Kid
|
Well guy I've looked over your ideas and I think it's going to be the work gloves. I've got big hands and I'm worried about fit at least I can go to mark's work warehouse to try them on first. Thanks guys
![]()
__________________
Type 2 airsoft player. |
![]() |
![]() |
![]() |
#9 | |
The colder it gets the more brittle the plastic parts in your gun will be. The gun might function through the whole winter, but there is a greater chance that something like the tappet plate will break.
That said, I have some nice Damascus gloves. They are durable (kevlar and leather palm) with a neoprene back. They keep your hands pretty warm and dry and have just enough dexterity to still work the gun. Quote:
__________________
BRAVO 2-7 Danger Close D43 |
||
![]() |
![]() |
![]() |
#10 | |
Quote:
![]() ![]()
__________________
"Mah check" Now you know ![]() |
||
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
|
|
![]() |