|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 5th, 2006, 23:33
|
#1 |
|
maruzen CA 870 bb loader brake
Okay the loading piece in my Maruzen CA 870 broke off i loaded a new G&P CA870 22Rds Short Magazine and put it in and then the loading mechanism in my shotty broke off any tips on how to repair it or were to get a replaicment part. Any help apreciated thanks :hammer:
__________________
Arsenal G&G M4, KWC TMP, KJW M1911A1, KWC M92, KWC Mauser M712 Team: Three Amigos |
|
|
|
February 6th, 2006, 00:12
|
#2 | ||
|
There are no replacement loading nozzles - my local indoor place has been looking for them for almost a year. If yours broke, good luck. You're pretty much guaranteed to be buying a parts gun to scavenge for spare parts.
__________________
Quote:
Quote:
|
||
|
|
|
|
February 6th, 2006, 00:14
|
#3 |
|
WW2 Airsofter
|
1
__________________
I can't measure my sig so I got this stupid tag line instead. Last edited by GMTII; May 11th, 2012 at 16:19.. |
|
|
|
|
February 6th, 2006, 00:22
|
#4 |
|
|
anyone know how hard it is to open up the gear box will spring and stuff come flying out if i open it up.
__________________
Arsenal G&G M4, KWC TMP, KJW M1911A1, KWC M92, KWC Mauser M712 Team: Three Amigos |
|
|
|
|
February 6th, 2006, 00:41
|
#5 |
|
WW2 Airsofter
|
1
__________________
I can't measure my sig so I got this stupid tag line instead. Last edited by GMTII; May 11th, 2012 at 16:19.. |
|
|
|
|
February 6th, 2006, 01:31
|
#6 |
|
|
problem you need a certain screw driver to take out the screws what are these companies up to trying to stop us from playing with our toys. :kill:
__________________
Arsenal G&G M4, KWC TMP, KJW M1911A1, KWC M92, KWC Mauser M712 Team: Three Amigos |
|
|
|
|
February 6th, 2006, 02:13
|
#7 |
|
maybe its to prevent stupid kids from openign it up, breaking something.. and saying they didnt get it assembled right when it arrived.. like.. blaming hte factory or somehting?
|
|
|
|
|
|
February 6th, 2006, 02:22
|
#8 |
|
|
well maybe but know its just a pain in the ass.
__________________
Arsenal G&G M4, KWC TMP, KJW M1911A1, KWC M92, KWC Mauser M712 Team: Three Amigos |
|
|
|
|
February 6th, 2006, 15:39
|
#9 |
|
its just a torx security bit, you can get em at any hardware store.
|
|
|
|
|
|
February 6th, 2006, 15:45
|
#10 |
|
|
okay well i work at Canadian tire so i will check for one when i go into work tommorow.
__________________
Arsenal G&G M4, KWC TMP, KJW M1911A1, KWC M92, KWC Mauser M712 Team: Three Amigos |
|
|
|
|
February 6th, 2006, 16:43
|
#11 |
|
Reminder to CA870 owners, DO NOT FILL YOUR BB MAGS TO THE MAX! Leave 4-5 bb's less then the top. Full mags cause the loading nozzle to break as it is unable to flex far enough during the first couple of bb loads. Remember the bb's can't be pushed down as the mag's full and instead puts pressure on the plastic loading nozzle.
__________________
|
|
|
|
|
February 6th, 2006, 17:02
|
#12 |
|
the version 2 CA870's seem to have a beefier/longer loading fin, probably for that very reason. should be ok if you pull the pump all the way back before inserting the mag as it pulls the nozzle back into its position behind the mag feed lips.
|
|
|
|
|
|
April 16th, 2006, 03:39
|
#13 |
|
I have a CA870 on the way with one of those g&p mags, so the problem was that the mag was overloaded and the pump wasnt back??? I just wanna make sure that its not the g&p mag thats breaking the loader
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
