maruzen CA 870 bb loader brake
 

Okay the loading piece in my Maruzen CA 870 broke off i loaded a new G&P CA870 22Rds Short Magazine and put it in and then the loading mechanism in my shotty broke off any tips on how to repair it or were to get a replaicment part. Any help apreciated thanks :hammer:

There are no replacement loading nozzles - my local indoor place has been looking for them for almost a year. If yours broke, good luck. You're pretty much guaranteed to be buying a parts gun to scavenge for spare parts.

1

anyone know how hard it is to open up the gear box will spring and stuff come flying out if i open it up.

1

problem you need a certain screw driver to take out the screws what are these companies up to trying to stop us from playing with our toys. :kill:

maybe its to prevent stupid kids from openign it up, breaking something.. and saying they didnt get it assembled right when it arrived.. like.. blaming hte factory or somehting?

well maybe but know its just a pain in the ass.

its just a torx security bit, you can get em at any hardware store.

okay well i work at Canadian tire so i will check for one when i go into work tommorow.

Reminder to CA870 owners, DO NOT FILL YOUR BB MAGS TO THE MAX! Leave 4-5 bb's less then the top. Full mags cause the loading nozzle to break as it is unable to flex far enough during the first couple of bb loads. Remember the bb's can't be pushed down as the mag's full and instead puts pressure on the plastic loading nozzle.

the version 2 CA870's seem to have a beefier/longer loading fin, probably for that very reason. should be ok if you pull the pump all the way back before inserting the mag as it pulls the nozzle back into its position behind the mag feed lips.

I have a CA870 on the way with one of those g&p mags, so the problem was that the mag was overloaded and the pump wasnt back??? I just wanna make sure that its not the g&p mag thats breaking the loader