VFC (UMAREX) MP5 GBBR Owners Thread

KenC · December 20th, 2012, 15:43

I have the WGC customs MP5 A3 which already comes with a reinforced loading muzzle,

VFC Tactical light handguard

And I got this from Ehobby and downed the power to about 310FPS.

http://shop.ehobbyasia.com/ready-fig...c-mp5-gbb.html

Had ONE of the mags leaking but fixed it with a new o-ring.

Shoots awesome!

sushi_boy604 · January 6th, 2013, 08:04

I have heard of some problems with some VFC MP5s where after several rounds, the gas from the magazine will spew out of the gun through the barrel. An example is in this video I have found.

(Airsoft) VFC MP5SD3 - YouTube

What would be the solution to this? My MP5 SD6 does that however my MP5 A4 works fine. I've done a few swaps with the gun's parts such as switching bolts and stocks. I can't seem to figure out why the SD6 seems to be doing that. Has anyone had similar problems with solutions?

gixxer66 · January 6th, 2013, 12:02

My flock does that spray thing once in a while and dumps the whole mag, was from the hammer stick, doesn't release off the valve and just sprays all the gas, I'd look into that.

cdn_ · January 6th, 2013, 16:20

Question for you mp5 users. Have you ever tried an Azimuth Hi-Performance Magazine Valve for your Mp5 mags?

sushi_boy604 · January 6th, 2013, 18:14

Quote:

Originally Posted by cdn_

Question for you mp5 users. Have you ever tried an Azimuth Hi-Performance Magazine Valve for your Mp5 mags?

I have them on all of my mags. They have been more gas efficient for me. It was a pain to install though. The o-ring that comes with the valve do not work. I had to take the original o-ring off the original values and replace it with the new one. Then it worked flawlessly.

sushi_boy604 · January 6th, 2013, 19:19

Quote:

Originally Posted by gixxer66

My flock does that spray thing once in a while and dumps the whole mag, was from the hammer stick, doesn't release off the valve and just sprays all the gas, I'd look into that.

So i took a look at the hammer. I am not sure what you mean by sticking but I made sure it was lubricated. This is not a bad gbbr but the fact that there's constant maintenance on this one makes me want to get rid of it.

SDU_Phil · January 30th, 2013, 00:32

those of you with vfc mp5s, what scope mount are you using? i know there is the vfc one, but are there any others that will fit? it's out of stock most places i looked.

Vavish · February 28th, 2013, 18:58

Hey guys,
I'm trying to get a hand on a Umarex (VFC) MP5-SD3 (GBB)

Where did you guys bought yours? I can't seem to find anywhere selling them in Canada and it's not on the safe list to be shipped to Canada from website that ships to Canada.

Any idea?

Thanks!

Hectic · February 28th, 2013, 19:15

Quote:

Originally Posted by Vavish

Hey guys,
I'm trying to get a hand on a Umarex (VFC) MP5-SD3 (GBB)

Where did you guys bought yours? I can't seem to find anywhere selling them in Canada and it's not on the safe list to be shipped to Canada from website that ships to Canada.

Any idea?

Thanks!

Get AV'd and someone can help you im sure.

Batchokookies · March 1st, 2013, 15:15

My MP5 is rock solid, very impressed with the quality of the materials VFC used for the body. Not impressed with the fact that my loading nozzle took a nasty chip after the first mag through it. Still fires great but I'm always concerned with it. Took a while for mags to sit and lock properly too.

Quote:

Originally Posted by Vavish

Hey guys,
I'm trying to get a hand on a Umarex (VFC) MP5-SD3 (GBB)

Where did you guys bought yours? I can't seem to find anywhere selling them in Canada and it's not on the safe list to be shipped to Canada from website that ships to Canada.

Any idea?

Thanks!

If you can't find public Canadian retailers that carry it after a google search, there's other problems. ASC rules state we can't tell you where to buy anything until you're AV'd.

KenC · March 2nd, 2013, 02:27

Dropped my mag and bent the feed lip...... Anyone knows where to find mag disassembly instructions?

N_Force · March 2nd, 2013, 14:42

check out post #59 for the link.

Quote:

Originally Posted by KenC

Dropped my mag and bent the feed lip...... Anyone knows where to find mag disassembly instructions?

Vavish · March 22nd, 2013, 22:26

Thanks for the reply, I've contacted someone to get verified... I find it a bit odd to get verified but I'll abide by the rules...

Again, thanks!

Metro · June 14th, 2013, 09:09

Thought some people could use this gun explosion map for possible up grade...

http://www.gb-tech.com.tw/download.asp?page=2

Sequential · June 19th, 2013, 16:01

Just updating on this thread.

Upgraded the gun with a TSC reinforced steel bolt head, FE Aluminum Loading Nozzle and Crusader Aluminum Loading Cylinder. The gun is amazing, it cycles and fires so much better from stock. Of course there was some minor modifications needed but otherwise, I have never jammed ONCE.

With the azimuth plastic loading nozzle it jammed like crazy.

The original bolt carrier is wearing down, but not enough to deem the gun inoperable.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 20th, 2012, 15:43	#61
KenC Trader rating Join Date: Dec 2001 Location: Calgary	I have the WGC customs MP5 A3 which already comes with a reinforced loading muzzle, VFC Tactical light handguard And I got this from Ehobby and downed the power to about 310FPS. http://shop.ehobbyasia.com/ready-fig...c-mp5-gbb.html Had ONE of the mags leaking but fixed it with a new o-ring. Shoots awesome! __________________ Last edited by KenC; December 20th, 2012 at 15:46..

January 6th, 2013, 16:20	#64
cdn_ Trader rating Join Date: Dec 2008 Location: Niagara Region	Question for you mp5 users. Have you ever tried an Azimuth Hi-Performance Magazine Valve for your Mp5 mags? __________________ Chris Task Force Delta Canada Redline N7 Milsim M4 FCC Systema PTW TM G17

January 30th, 2013, 00:32	#67
SDU_Phil Trader rating Join Date: Feb 2006 Location: Alberta	those of you with vfc mp5s, what scope mount are you using? i know there is the vfc one, but are there any others that will fit? it's out of stock most places i looked. __________________ 男兒一生要經過世上磨練共多少男兒一生要幾次做到失落與心焦我有無邊毅力捱盡困難考驗　立折披荊斬棘心裡更願永不折腰大丈夫一生要經過困難磨練共多少大丈夫一生要幾次落魄失望與心焦冷雨狂風歷盡人格更光耀　立地頂天男子心裡磊落不折腰

January 6th, 2013, 08:04	#62
sushi_boy604 Trader rating Join Date: Jun 2008 Location: British Columbia	I have heard of some problems with some VFC MP5s where after several rounds, the gas from the magazine will spew out of the gun through the barrel. An example is in this video I have found. (Airsoft) VFC MP5SD3 - YouTube What would be the solution to this? My MP5 SD6 does that however my MP5 A4 works fine. I've done a few swaps with the gun's parts such as switching bolts and stocks. I can't seem to figure out why the SD6 seems to be doing that. Has anyone had similar problems with solutions?

January 6th, 2013, 12:02	#63
gixxer66 Trader rating Join Date: Jan 2013	My flock does that spray thing once in a while and dumps the whole mag, was from the hammer stick, doesn't release off the valve and just sprays all the gas, I'd look into that.

February 28th, 2013, 18:58	#68
Vavish Trader rating Join Date: Feb 2013	Hey guys, I'm trying to get a hand on a Umarex (VFC) MP5-SD3 (GBB) Where did you guys bought yours? I can't seem to find anywhere selling them in Canada and it's not on the safe list to be shipped to Canada from website that ships to Canada. Any idea? Thanks!

March 2nd, 2013, 02:27	#71
KenC Trader rating Join Date: Dec 2001 Location: Calgary	Dropped my mag and bent the feed lip...... Anyone knows where to find mag disassembly instructions? __________________

March 22nd, 2013, 22:26	#73
Vavish Trader rating Join Date: Feb 2013	Thanks for the reply, I've contacted someone to get verified... I find it a bit odd to get verified but I'll abide by the rules... Again, thanks!

June 14th, 2013, 09:09	#74
Metro Moving_target Trader rating Join Date: Mar 2005 Location: Ottawa	Thought some people could use this gun explosion map for possible up grade... http://www.gb-tech.com.tw/download.asp?page=2

June 19th, 2013, 16:01	#75
Sequential Trader rating Join Date: Sep 2007 Location: HKG.YYZ.NRT	Just updating on this thread. Upgraded the gun with a TSC reinforced steel bolt head, FE Aluminum Loading Nozzle and Crusader Aluminum Loading Cylinder. The gun is amazing, it cycles and fires so much better from stock. Of course there was some minor modifications needed but otherwise, I have never jammed ONCE. With the azimuth plastic loading nozzle it jammed like crazy. The original bolt carrier is wearing down, but not enough to deem the gun inoperable. __________________

VFC (UMAREX) MP5 GBBR Owners Thread

Airsoft Guns Discussion