Inner Barrel Length on G36

dave_e · January 22nd, 2008, 12:53

Does anyone have the actual length of the inner barrel on a G36? Not the G36C or K variants. I already know the C size. Thanks in advance.

Syn · January 22nd, 2008, 13:00

What make of g36 you have? I see a few sizes listed using google for 494mm to 509 to 550 depending eg deepfire have a few lengths.

dave_e · January 22nd, 2008, 14:04

Hmm I know the G36C inner barrel is 247mm so those numbers seem closer to right. I assumed (re. when I assume I make an ASS out of U and ME) that the G36 model is a standard length. After more hunting from your tip I gather the 509 is right thanks m8.

Mr. G36! · January 22nd, 2008, 14:16

Typically:

G36- 495mm
G36K- 357mm
G36C- 247mm

It'll vary slightly based on the manufacturer, but they should all be similar if not identical.

Syn · January 22nd, 2008, 14:19

To make sure, suggest you take the barrel assembly out and just measure it. That way there is no guessing. It is not even that hard taking it apart.

Here is the g36c version I used for Prometheus 6.03 barrel upgrade. Taking the barrel assembly out in less than a few minutes.
http://www.urizenproject.net/airsoft/g36cbarrel/

Darklen · January 22nd, 2008, 14:23

I used a 509mm for an M16 for my full sized G36. Works like a charm.

Galahad · January 22nd, 2008, 14:44

495mm is the original length, 509mm is the closest size tighbore you can get, so it will stick out inside the flash hider.

dave_e · January 22nd, 2008, 15:54

Awesome feedback folks thanks.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 22nd, 2008, 12:53	#1
dave_e Trader rating Join Date: Mar 2007 Location: Calgary	Inner Barrel Length on G36 Does anyone have the actual length of the inner barrel on a G36? Not the G36C or K variants. I already know the C size. Thanks in advance. __________________ Make love not war...peace man Dave

January 22nd, 2008, 13:00	#2
Syn Trader rating Join Date: Aug 2005 Location: Toronto	What make of g36 you have? I see a few sizes listed using google for 494mm to 509 to 550 depending eg deepfire have a few lengths. __________________ Last edited by Syn; January 22nd, 2008 at 13:10..

January 22nd, 2008, 14:04	#3
dave_e Trader rating Join Date: Mar 2007 Location: Calgary	Hmm I know the G36C inner barrel is 247mm so those numbers seem closer to right. I assumed (re. when I assume I make an ASS out of U and ME) that the G36 model is a standard length. After more hunting from your tip I gather the 509 is right thanks m8. __________________ Make love not war...peace man Dave Last edited by dave_e; January 22nd, 2008 at 14:14..

January 22nd, 2008, 14:16	#4
Mr. G36! Trader rating Join Date: Jul 2007 Location: Beautiful Thunder Bay, where dreams become nightmares!	Typically: G36- 495mm G36K- 357mm G36C- 247mm It'll vary slightly based on the manufacturer, but they should all be similar if not identical. __________________ Airsoft It's all fun and games until someone gets hurt...and then it becomes sport!

January 22nd, 2008, 14:19	#5
Syn Trader rating Join Date: Aug 2005 Location: Toronto	To make sure, suggest you take the barrel assembly out and just measure it. That way there is no guessing. It is not even that hard taking it apart. Here is the g36c version I used for Prometheus 6.03 barrel upgrade. Taking the barrel assembly out in less than a few minutes. http://www.urizenproject.net/airsoft/g36cbarrel/ __________________

January 22nd, 2008, 14:23	#6
Darklen Administrator Trader rating Join Date: Jan 2004 Location: Red Deer, AB	I used a 509mm for an M16 for my full sized G36. Works like a charm. __________________ *ASC Age Verifier for Red Deer & Area Alberta*

January 22nd, 2008, 14:44	#7
Galahad Trader rating Join Date: Jan 2007 Location: Halifax, NS	495mm is the original length, 509mm is the closest size tighbore you can get, so it will stick out inside the flash hider. __________________

January 22nd, 2008, 15:54	#8
dave_e Trader rating Join Date: Mar 2007 Location: Calgary	Awesome feedback folks thanks. __________________ Make love not war...peace man Dave

Inner Barrel Length on G36

Upgrades & Modifications