My Systema PTW Diemaco C8...

jumpin · July 26th, 2006, 18:36

I finally got my Systema Challenge Kit assembled. One of the things that I actually really like about the kit is that there are no trademarks, especially the fugly Systema one! That allowed me to get the lower receiver engraved with Diemaco C8 markings and my own custom serial number! (Done by Insignio in Langley- super nice!) I'm pretty pumped! :-D I also modded it, with a small internal micro switch which allows me to switch the fire selector switch's AUTO function between full auto and 3 round burst!

I also purchased a Pelican 1700 case for it, and I'm just finishing my layout design. When then foam is all cut out for my weapon and accessories, I'll post some more pics.

Kid · July 26th, 2006, 18:41

That's definately the hottest rifle I have ever seen on this site...
...I am not just meaning by FPS either.

That's definately a good job he did, I like that it has the worn look around the trades too... It just does something for realism.

stokes · July 26th, 2006, 18:44

Nice job man! Really loving the custom engravings. How much did that cost you by the way?

DuffMan · July 26th, 2006, 18:57

The 'P' at the top should be an 'R'. Sorry man! It shouldn't cost that much to get one line engraved.

wingman · July 26th, 2006, 19:15

Wow, I all-of-a-sudden like Armalites again.How much did the ingraving run ya?

jumpin · July 26th, 2006, 20:06

Quote:

Originally Posted by Duff_Man_in_CADPATs

The 'P' at the top should be an 'R'. Sorry man! It shouldn't cost that much to get one line engraved.

Damn You! Your right. Don't know how that one got through quality control? Should be easy enough to fix myself.

Quote:

Originally Posted by stokes

Nice job man! Really loving the custom engravings. How much did that cost you by the way?

$180 for two of them. The first took around 3-1/2 hours to tweek the artwork, set up the jig for the receiver and to figure how we were going to do it, exact location, testing, etc... The second one (for my buddy) took about 15 minutes.

boalorka · July 27th, 2006, 00:01

Looks very realistic and worn. Great job.

mcguyver · July 27th, 2006, 00:10

Nice job on the kit. Now you know what I mean when I say "Once you hold a Systema, you're hooked".

I think the Challenge kit is the way to go and with "some assembly required" you can save a ton of cash.

Aww, hell, I guess I'll have to get one, too. Anyone want to buy some kids?

Tankdude · July 27th, 2006, 00:17

These kids of which you speak, have they been worked hard?

That is a really really really nice gun.
Simple and pure.

Polo609 · July 27th, 2006, 01:03

Absolutley beautiful.

Annihilation · July 27th, 2006, 13:02

It'd look nice with an Elcan on it.

Red_Star · July 27th, 2006, 16:13

Congrats on the gun looks super!

dontask · July 27th, 2006, 18:45

i love the engravings! awsum job!

attack-beaver · July 28th, 2006, 02:34

well holy fucking christ thats amazing. but i would like to see a C7 for once you now.

Xm4st3r · July 28th, 2006, 03:50

Sweet Gun. Looks really nice. As mentionned above, you just need to add an Elcan optical.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 26th, 2006, 18:36	#1
jumpin Trader rating Join Date: Jun 2006 Location: North Vancouver	My Systema PTW Diemaco C8... I finally got my Systema Challenge Kit assembled. One of the things that I actually really like about the kit is that there are no trademarks, especially the fugly Systema one! That allowed me to get the lower receiver engraved with Diemaco C8 markings and my own custom serial number! (Done by Insignio in Langley- super nice!) I'm pretty pumped! :-D I also modded it, with a small internal micro switch which allows me to switch the fire selector switch's AUTO function between full auto and 3 round burst! I also purchased a Pelican 1700 case for it, and I'm just finishing my layout design. When then foam is all cut out for my weapon and accessories, I'll post some more pics. Last edited by jumpin; September 18th, 2014 at 02:42.. Reason: Image links fixed

July 26th, 2006, 18:57	#4
DuffMan Trader rating Join Date: Feb 2004	The 'P' at the top should be an 'R'. Sorry man! It shouldn't cost that much to get one line engraved. __________________ "He resisted. I asked him to comply." "Telling him to 'eat it, bitch' is not really a request."

July 27th, 2006, 00:10	#8
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Nice job on the kit. Now you know what I mean when I say "Once you hold a Systema, you're hooked". I think the Challenge kit is the way to go and with "some assembly required" you can save a ton of cash. Aww, hell, I guess I'll have to get one, too. Anyone want to buy some kids? __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

July 26th, 2006, 18:41	#2
Kid Trader rating Join Date: Feb 2005 Location: Moose Jaw, SK	That's definately the hottest rifle I have ever seen on this site... ...I am not just meaning by FPS either. That's definately a good job he did, I like that it has the worn look around the trades too... It just does something for realism.

July 26th, 2006, 18:44	#3
stokes Trader rating Join Date: Dec 2005 Location: Toronto	Nice job man! Really loving the custom engravings. How much did that cost you by the way?

July 26th, 2006, 19:15	#5
wingman Trader rating Join Date: Dec 2005 Location: Saskatoon	Wow, I all-of-a-sudden like Armalites again.How much did the ingraving run ya?

July 27th, 2006, 00:01	#7
boalorka Banned Trader rating Join Date: Jun 2006 Location: T.O.	Looks very realistic and worn. Great job.

July 27th, 2006, 00:17	#9
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	These kids of which you speak, have they been worked hard? That is a really really really nice gun. Simple and pure.

July 27th, 2006, 01:03	#10
Polo609 Trader rating Join Date: Aug 2005 Location: Montreal/Saskatoon	Absolutley beautiful. __________________ N Sask R Infantry Reservist Coming soon... Vltor + 553+Surefire = win

July 27th, 2006, 13:02	#11
Annihilation Trader rating Join Date: Jul 2006 Location: Canada	It'd look nice with an Elcan on it.

July 27th, 2006, 16:13	#12
Red_Star Trader rating Join Date: Jul 2006 Location: MTL BABY!	Congrats on the gun looks super! __________________ Happy (((Stereo))) Boy

July 27th, 2006, 18:45	#13
dontask Trader rating Join Date: Jan 2006 Location: Vancouver	i love the engravings! awsum job! __________________ Present TM AUG A2 [Standard/Commando barrel], KSC U.S. M9 HW, KSC USP Compact

July 28th, 2006, 02:34	#14
attack-beaver Trader rating Join Date: May 2005 Location: calgary	well holy fucking christ thats amazing. but i would like to see a C7 for once you now.

July 28th, 2006, 03:50	#15
Xm4st3r Trader rating Join Date: Jul 2006 Location: Quebec	Sweet Gun. Looks really nice. As mentionned above, you just need to add an Elcan optical.

My Systema PTW Diemaco C8...

Airsoft Guns Discussion