![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
Mr. Silencer
|
Got pwned by Guarder High Output Valve for WA
Sooo.... got one of these last night.
Installed it along with a new Guarder Firing Pin. The WA already has the upgraded hammer spring in there. Filled it up with propane, put the mag in, racked it back, and pulled the trigger... *puff* Gun doesn't blow back, but the bb comes shooting out at around 380fps. Seems like the hammer isn't strong enough to hit the valve hard enough. Any other experiences?? |
![]() |
![]() |
![]() |
#2 |
Delierious Designer of Dastardly Detonations
![]() ![]() ![]() ![]() Join Date: Dec 2001
Location: in the dark recesses of some metal chip filled machine shop
|
Chill your mag for 5min in your fridge and try your gun again.
If that fixes your problem, the your hammer spring isn't stiff enough to blast open the valve.
__________________
Want nearly free GBB gas? ![]() |
![]() |
![]() |
![]() |
#3 |
I have run in to this problem a few times with Guarder valves. Take the valve apart and cut one or two coils off the spring, reassemble and it should be good to go.
*Note* If you cut too much of the spring off the valve will not hold gas. |
|
![]() |
![]() |
![]() |
#4 |
Delierious Designer of Dastardly Detonations
![]() ![]() ![]() ![]() Join Date: Dec 2001
Location: in the dark recesses of some metal chip filled machine shop
|
??!! Cut the coils on the dinky return spring in the valve?
They're nowhere near stiff enough to be causing a problem.
__________________
Want nearly free GBB gas? ![]() |
![]() |
![]() |
![]() |
#5 |
Mr. Silencer
|
The stupid pressure is too high... even the upgraded hammer spring can't hit it hard enough.
Time to put extra spacers in there.. muhahahaha.... 400fps here i come |
![]() |
![]() |
![]() |
#6 |
use a 150% hammer spring and a longer firing pin will solve the problem
|
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
Thread Tools | |
|
|
![]() |