TM Version 6 Gears

[aireoth]

Hi All,

I'm desperate to find some super torque up gears for the TM Version 6 Gearbox (P90/M1A1). Redwolf, 007 and EbairSoft plus a few other sites I've googled dont seem to have them. Any Suggestions?

Thanks!

[pancakedestroyer]

It should just use V2/3 gears.

[aireoth]

You sure, I have a set that fits the MP5, the spur gear is larger then that of the Version 6 gear box.

[pancakedestroyer]

100% sure.

[ILLusion]

What spring are you pulling that would require a super torque up?

[aireoth]

M150 with the systema Magnum Motor, as far as I know (limited) it needs super torque up.

[ILLusion]

I'd probably recommend going with an Ultra (Systema) / Triple (Prometheus) torque up levels. Super Torque up I'd probably recommend for M130-M140 springs.

I've always used v2/3 gearsets on my P90.

[venture]

Agree, v 2,3 & 6 should be identical. That is for TM, clones might differ. What is your aeg?

[aireoth]

TM model, 007 just must have sold the wrong parts to me if v2/3 will work. Is there a difference if they ar Helical?

[DarkAngel]

Helicals are quieter, but they are a little harder to shim properly as they sound very different. If your looking at systema helical gears, Id avoid em. their materials they use have gone downhill since they started outsourcing factories in china to make them instead of making them out of steel in japan like they used to.

Guarder Tempers their Gears improperly, making them brittle and prone to shatter.
Im using proms, but they dont make helicals. And im pretty sure they dont make ultra torque up

[ILLusion]

Originally Posted by DarkAngel

Im using proms, but they dont make helicals. And im pretty sure they dont make ultra torque up

Only Prometheus High Speed and Prometheus (single) Torque gears are flat.

Prometheus Double Torque, Triple Torque and Max Torque are all helical. There are no flat options for these three latter models, and there are no helical models of the two former models.