Real Sword Type 56

AS92-RD · February 19th, 2009, 13:56

Quote:

Originally Posted by Crunchmeister

Even with a PTW....

Agreed. Snow and sand isn't such a big deal as long as too much sand doesn't get into the gearbox. The exploding and driving over it though... Yeah, that's impressive...

Yeah. and it worked even after they put it in a pail of water. Amazing durability. Does Real sword make M16/M4 series rifles?

ShelledPants · February 19th, 2009, 13:57

Quote:

Originally Posted by AS92-RD

Yeah. and it worked even after they put it in a pail of water. Amazing durability. Does Real sword make M16/M4 series rifles?

They make the Type 97 and Type 97B which take STANAG magazines.

AS92-RD · February 19th, 2009, 14:04

Quote:

Originally Posted by ShelledPants

They make the Type 97 and Type 97B which take STANAG magazines.

Wow, that gun looks like a bad mix of a FAMAS and an SA80. I think I'll hold out for an Armalite.

ShelledPants · February 19th, 2009, 14:10

Quote:

Originally Posted by AS92-RD

Wow, that gun looks like a bad mix of a FAMAS and an SA80. I think I'll hold out for an Armalite.

Actually they have gotten great reviews. But to each his own.

Double Tapper · February 19th, 2009, 14:11

They are a good looking aeg,I'm looking to get one this summer.

AS92-RD · February 19th, 2009, 14:17

Quote:

Originally Posted by ShelledPants

Actually they have gotten great reviews. But to each his own.

Well, I just don't like how it looks. I'm sure it gets great reviews for quality. Even if they don't make an Armalite I would go with an AK variant.

Metninja · February 19th, 2009, 16:08

That's fine, I prefer the looks of the wood stock anyways, going to remove the bayonet though. Is there a recommended battery for it? Or any 8.4v will do?

Crunchmeister · February 19th, 2009, 16:20

I run a 9.6V stick battery in mine. Fits perfectly in the gas tube under the dust cover. You could easily fit up to a 12V stick battery there. You can also fit a custom 8.4V or 9.6V mini battery into the stock.

Metninja · February 19th, 2009, 16:30

Perfect. Just ordered it from one of our retailers, the wait begins!

EDIT -

Could anyone link a site that sells real sword mags? I also am looking for something that holds two mags together so when one clip runs out i can pull it out and switch to the other, if you know what i mean.

Old School Punk · February 19th, 2009, 17:19

I have read that this gun only shoots at 295 fps.

Is it just me or does this seem really low for such a high end gun?

Is this gun sufficiently "well built" enough to only require a spring upgrade to get the fps up to an acceptable level?

Thanks

Gordo

Amos · February 19th, 2009, 17:25

FPS means shit.

It's one of the easiest things to change on a gun.

High FPS guns are only like that to sucker new players into thinking they're better.

The Saint · February 19th, 2009, 17:25

Quote:

Originally Posted by Old School Punk

Is this gun sufficiently "well built" enough to only require a spring upgrade to get the fps up to an acceptable level

From what I've read, the only thing weak about the mechbox is the spring. It can stand up to HK field limits (~450fps) in stock config (replace spring).

Bowers · February 19th, 2009, 17:29

Quote:

Originally Posted by Metninja

Perfect. Just ordered it from one of our retailers, the wait begins!

EDIT -

Could anyone link a site that sells real sword mags? I also am looking for something that holds two mags together so when one magazine runs out i can pull it out and switch to the other, if you know what i mean.

like this?
http://www.airsoftpost.com/full-meta...p-p-26533.html

tape also works

ShelledPants · February 19th, 2009, 17:30

Quote:

Originally Posted by Metninja

Perfect. Just ordered it from one of our retailers, the wait begins!

EDIT -

Could anyone link a site that sells real sword mags? I also am looking for something that holds two mags together so when one clip runs out i can pull it out and switch to the other, if you know what i mean.

Mags
http://www.redwolfairsoft.com/redwol...l?prodID=23246

Ak Magazine Coupler
http://www.lapolicegear.com/caaakmagco.html

But for the record, 100mph tape works just as well.

johjoh · February 19th, 2009, 21:13

Quote:

Originally Posted by Metninja

Perfect. Just ordered it from one of our retailers, the wait begins!

EDIT -

Could anyone link a site that sells real sword mags? I also am looking for something that holds two mags together so when one clip runs out i can pull it out and switch to the other, if you know what i mean.

i never read much yet about real sword because im so busy lately but do you require special mags for the RS products? or ucan use and tm compatible mags, because that question kinda put me in a, uhh? what?? position lol

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 19th, 2009, 16:20	#38
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	I run a 9.6V stick battery in mine. Fits perfectly in the gas tube under the dust cover. You could easily fit up to a 12V stick battery there. You can also fit a custom 8.4V or 9.6V mini battery into the stock. __________________

February 19th, 2009, 16:30	#39
Metninja Trader rating Join Date: Jul 2008 Location: Montreal	Perfect. Just ordered it from one of our retailers, the wait begins! EDIT - Could anyone link a site that sells real sword mags? I also am looking for something that holds two mags together so when one clip runs out i can pull it out and switch to the other, if you know what i mean. Last edited by Metninja; February 19th, 2009 at 17:09..

February 19th, 2009, 17:19	#40
Old School Punk Trader rating Join Date: Sep 2008 Location: Edmonton, Alberta	I have read that this gun only shoots at 295 fps. Is it just me or does this seem really low for such a high end gun? Is this gun sufficiently "well built" enough to only require a spring upgrade to get the fps up to an acceptable level? Thanks Gordo __________________

February 19th, 2009, 14:11	#35
Double Tapper Trader rating Join Date: Jul 2006 Location: The land of the over regulated and the banners	They are a good looking aeg,I'm looking to get one this summer.

February 19th, 2009, 16:08	#37
Metninja Trader rating Join Date: Jul 2008 Location: Montreal	That's fine, I prefer the looks of the wood stock anyways, going to remove the bayonet though. Is there a recommended battery for it? Or any 8.4v will do?

February 19th, 2009, 17:25	#41
Amos Trader rating Join Date: Aug 2006 Location: Japan	FPS means shit. It's one of the easiest things to change on a gun. High FPS guns are only like that to sucker new players into thinking they're better. __________________ Custom Builds: FA3674U Krinkov G3SD6

Real Sword Type 56

Airsoft Guns Discussion