![]() |
|
|
||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
![]() |
|
Thread Tools |
![]() |
#1 |
Another Kraken Thread OMG
Hey guys,
I bought an element body of Haung, for my Kraken. Its the 74 with top cover and grip. Now the mech box fits just fine, as does the front set. I can't seem to get the grip on however. Yes I have a 74 grip. but the back tab on the grip is not meeting up with the hole in the body for it. Should I just cut this tab off? or dremel a hole into the body for it. anyone else have this problem? |
|
![]() |
![]() |
![]() |
#2 |
Element body's are known for fitment issues, I couldn't get my gearbox into mine, concider yourself lucky.
Just dremel it out to fit your grip and you'll be golden.
__________________
![]() |
|
![]() |
![]() |
![]() |
#3 |
Can't fix my own guns. Willing to fix yours.
|
I also had fit issues with my Element body, everything went together fine, but there was about 3/16" gap between the gas block tabs and the front of the battery tray, so it actually looked quite back till i filled the gap with JBweld. Just take the grinder to it till it fits!
|
![]() |
![]() |
![]() |
#4 |
Modify the cheapest part if possible, in your case this would be the grip.
If you wanna drop by I can make everything fit nicely for you (Wont charge you anything for that :P, I can also show you an example of an AK I built.. I've got it sitting open on the floor right now) |
|
![]() |
![]() |
![]() |
#5 |
Amos, how does later tonight sound?
I work till 8, but could drop by around 9 or so. |
|
![]() |
![]() |
![]() |
#6 | |
Quote:
I'm supposed to age-verify and look at a couple guns tonight... but I haven't been contacted by the guys yet. |
||
![]() |
![]() |
![]() |
#7 |
Pm me your number.
|
|
![]() |
![]() |
![]() |
#8 |
amos the airsoft wizard has fixed my problem.
|
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
Thread Tools | |
|
|
![]() |