Getting Silicone In Duster?

Sameo · May 5th, 2007, 20:25

I've come up with one thread upon searching this and am just wondering... do I really have to transfer tanks in order to get the silicone into the duster? Is there a way to get the droplets down the tube? (http://www.active-tech.ca/b2c/redire...ID=402A%2D450G)

Darklen · May 5th, 2007, 21:40

You'll need an adapter to inject the duster from the can to your mag. The tube and trigger top that comes with the duster from the store have to be removed and the adapter sticks on top of the remaining tube. You put a couple of drops of silicone oil in the adapter.

Sameo · May 5th, 2007, 21:58

Quote:

Originally Posted by Darklen

You'll need an adapter to inject the duster from the can to your mag. The tube and trigger top that comes with the duster from the store have to be removed and the adapter sticks on top of the remaining tube. You put a couple of drops of silicone oil in the adapter.

Thank you, Darklen.

Kos-Mos · May 5th, 2007, 22:02

Try wacking it on the corner of a table... usualy works for me. They are jsut clipped on top of the can...

Try not to hit it too close to the actual can, because you can rip the outlet tube you need.

MadMax · May 5th, 2007, 23:48

I'm actually working on a project to do just that!

I've developed a kind of high pressure syringe for shooting a measured dose of silicone oil into a container of unlubricated gas. It's compatible with duster and propane adaptors. One shot and the container is completely lubed. Manufacturing is under way already.

No more periodic drips!

ILLusion · May 6th, 2007, 00:52

periodic drips can ruin a good time.

Darklen · May 6th, 2007, 01:46

But you can get a prescription for that.

Steve_U1S · May 6th, 2007, 17:25

Good to see MadMax focused on development/production of handy gadgets like the one mentioned above...

Trader rating · May 6th, 2007, 17:38

so madmax, when can we expect to buy it?

MadMax · May 6th, 2007, 22:21

Soon I hope. I'm working on tooling for the assembly run. I think they may be ready for sale in a few weeks.

Sameo · May 9th, 2007, 14:05

I need to rethink my way of removing the damn lids... I usually push up on the trigger to snap that part off and out then snapping off the side plastic... but this time I lost a hell of a lot of compressed goods when pushing off the trigger.. not to mention freezing my hand. :P

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 5th, 2007, 20:25	#1
Sameo Trader rating Join Date: Dec 2003 Location: Edmonton	Getting Silicone In Duster? I've come up with one thread upon searching this and am just wondering... do I really have to transfer tanks in order to get the silicone into the duster? Is there a way to get the droplets down the tube? (http://www.active-tech.ca/b2c/redire...ID=402A%2D450G) __________________ -------------------------------------------------------

May 5th, 2007, 23:48	#5
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	I'm actually working on a project to do just that! I've developed a kind of high pressure syringe for shooting a measured dose of silicone oil into a container of unlubricated gas. It's compatible with duster and propane adaptors. One shot and the container is completely lubed. Manufacturing is under way already. No more periodic drips! __________________ Want nearly free GBB gas?

May 6th, 2007, 00:52	#6
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	periodic drips can ruin a good time. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

May 5th, 2007, 21:40	#2
Darklen Administrator Trader rating Join Date: Jan 2004 Location: Red Deer, AB	You'll need an adapter to inject the duster from the can to your mag. The tube and trigger top that comes with the duster from the store have to be removed and the adapter sticks on top of the remaining tube. You put a couple of drops of silicone oil in the adapter.

May 5th, 2007, 22:02	#4
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	Try wacking it on the corner of a table... usualy works for me. They are jsut clipped on top of the can... Try not to hit it too close to the actual can, because you can rip the outlet tube you need.

May 6th, 2007, 01:46	#7
Darklen Administrator Trader rating Join Date: Jan 2004 Location: Red Deer, AB	But you can get a prescription for that.

May 6th, 2007, 17:25	#8
Steve_U1S Trader rating Join Date: Jul 2006 Location: Toronto, Ontario	Good to see MadMax focused on development/production of handy gadgets like the one mentioned above...

May 6th, 2007, 17:38	#9
pawscal Guest Trader rating	so madmax, when can we expect to buy it?

May 6th, 2007, 22:21	#10
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	Soon I hope. I'm working on tooling for the assembly run. I think they may be ready for sale in a few weeks. __________________ Want nearly free GBB gas?

May 9th, 2007, 14:05	#11
Sameo Trader rating Join Date: Dec 2003 Location: Edmonton	I need to rethink my way of removing the damn lids... I usually push up on the trigger to snap that part off and out then snapping off the side plastic... but this time I lost a hell of a lot of compressed goods when pushing off the trigger.. not to mention freezing my hand. :P __________________ -------------------------------------------------------

Getting Silicone In Duster?

Doctor's Corner