Airsoft Canada - View Single Post

grimreefer · February 23rd, 2009, 14:56

I'd like to upgrade to a Modify S120 spring, but I'm wondering if that will cause problems for my mechbox and internals. Mechbox is stock TM with metal bushings. Gears are stock TM. Piston and cylinder set are Systema. Motor will be a Guarder Infinite Torque Up. Battery is a crane 9.6v.

My current spring is a Modify M110. Rate of fire is good, but not satisfied with FPS. I'm aiming for 400-415 fps so I can use .28s with good range. I'm hoping that a motor upgrade from EG1000 to Guarder Infinite Torque will help make up for the loss of ROF. I don't want to do this if it is going to greatly increase the chance of the mechbox or other internals breaking. Any advice is appreciated.

February 23rd, 2009, 14:56	#1
grimreefer Trader rating Join Date: May 2008 Location: Victoria, BC	Will M120 Spring work with my gun? I'd like to upgrade to a Modify S120 spring, but I'm wondering if that will cause problems for my mechbox and internals. Mechbox is stock TM with metal bushings. Gears are stock TM. Piston and cylinder set are Systema. Motor will be a Guarder Infinite Torque Up. Battery is a crane 9.6v. My current spring is a Modify M110. Rate of fire is good, but not satisfied with FPS. I'm aiming for 400-415 fps so I can use .28s with good range. I'm hoping that a motor upgrade from EG1000 to Guarder Infinite Torque will help make up for the loss of ROF. I don't want to do this if it is going to greatly increase the chance of the mechbox or other internals breaking. Any advice is appreciated. __________________ Last edited by grimreefer; February 23rd, 2009 at 15:04..