|
Where are you located? It's good to know so local guys can chime in.
If the motor is just spinning (i.e. you hear the motor turn, but no other noise at all, and it'll turn for as long as you hold the trigger down)...then your motor isn't seated high enough to mesh with the bevel gear.
If it sounds like the gears are spinning but nothing's happening...time to open up the mechbox (same as an M4...except the body comes apart a little different than a plastic TM...pretty close). Dive in (check out mechbox.com) or get it to a gun doc.
Best of luck,
Tys
|