Airsoft Canada - View Single Post - G&G GR-25

BORDENSNIPER · December 14th, 2008, 17:44

this could mean many problems.

first, u should clarify ur question as to what is not moving, what have u tried so far etc..

Now,

if ur motor is spinning while everything is assembled then that most likely means that ur motor is sitting too low. screw the motor screw from the bottom of the grip so that it moves the motor upward. do 2 turns and then try firings 2 turns then try firing. if it start firing try using common sense and adjust the motor accordingly.

if that doesnt work, take the gun apart if u konw how to, if u dont, still do it sine ul need to learn some day anyway. once u take the gearbox out check to see if the selector switch is loose if it is, tighten its screw from the inside of the gun body, put the grabox back and and most likely it will work.

If the selector switch is not loose, then take the gearbox apart it might be seized/seizing because the shimming is shit, or its not lubed or sometinhg just broke inside.

ALSO, it being semi auto only can also be a cause of 2 metal tabs that are inside the gearbox in between wich the trigger pushes a connector into. they might be loose, causing a shit connection and eventually giving u semi auto only.,,theat happened to me before.

so try all of this out then tell us what the results are.

cheers.

December 14th, 2008, 17:44	#3
BORDENSNIPER Trader rating Join Date: Feb 2005	this could mean many problems. first, u should clarify ur question as to what is not moving, what have u tried so far etc.. Now, if ur motor is spinning while everything is assembled then that most likely means that ur motor is sitting too low. screw the motor screw from the bottom of the grip so that it moves the motor upward. do 2 turns and then try firings 2 turns then try firing. if it start firing try using common sense and adjust the motor accordingly. if that doesnt work, take the gun apart if u konw how to, if u dont, still do it sine ul need to learn some day anyway. once u take the gearbox out check to see if the selector switch is loose if it is, tighten its screw from the inside of the gun body, put the grabox back and and most likely it will work. If the selector switch is not loose, then take the gearbox apart it might be seized/seizing because the shimming is shit, or its not lubed or sometinhg just broke inside. ALSO, it being semi auto only can also be a cause of 2 metal tabs that are inside the gearbox in between wich the trigger pushes a connector into. they might be loose, causing a shit connection and eventually giving u semi auto only.,,theat happened to me before. so try all of this out then tell us what the results are. cheers.