[theguy]

Well, over the last few days i have made a few posts here, I opened up my mechbox for the very first time...and i am having some issues! My mechbox seems to be mostly functioning properly, except for a glitch with what I believe to be the gear timing. when firing in semi auto, the mechbox firing, but the piston returns to the fully cocked piston. this will soon kill my spring, I was given a very detailed answer that i think will solve my problem, but after re-disassembling the gun and giving it a few test shots, i ran into some issues.

When the trigger is pulled, i can hear the mechbox fire ( i can see it firing if i remove the magwell) but the BB does not leave the barrel, if i tilt the gun downwards it will fall out the barrel. I have tried adjusting my hop up with no luck. Any ideas??

It is a JG G36c
mostly stock slightly weaker then stock spring and sorbo
I have a M4 magwell and the standard magwell, i have tried both ,and both give the same results...

I'm assuming its some sort of air leak, but i really don't know enought about this sort of thing to know for sure.

I did my best to look for a thread, or something on google that would solve this issue, sorry if it is a repost.
any help would be greatly appreciated
Thanks in advance
-Ben