Airsoft Canada - View Single Post - battery problem, smaller battery won't cycle

Fox Hound · November 22nd, 2007, 11:27

I finaly shimmed my gears to perfection and im just so stoked how well my gun fires. I elminated the annoying humming sound when firing now it only sounds like a pop pop pop.

Ok so heres the thing, i also rewired the gear box because i really wanted to keep the CQBR look so i had the wires routed to the side and into a ready mag. I have a 9.6v 2000mah battery that i have in the magazine but it wont cycle the piston, all i hear is a faint clunk.

But when i use my crane stock which is at 9.6v 3300mah it worked perfect, and there is no way i can fit this into the ready mag.

BTW im running a m120 with a systema magnum if that helps. I can't figure out why this isnt working. The motor draws about 10amps i think and both batteries should be efficient i think.

any ideas?

November 22nd, 2007, 11:27	#1
Fox Hound Trader rating Join Date: Mar 2005 Location: North Bay / Stoney Creek	battery problem, smaller battery won't cycle I finaly shimmed my gears to perfection and im just so stoked how well my gun fires. I elminated the annoying humming sound when firing now it only sounds like a pop pop pop. Ok so heres the thing, i also rewired the gear box because i really wanted to keep the CQBR look so i had the wires routed to the side and into a ready mag. I have a 9.6v 2000mah battery that i have in the magazine but it wont cycle the piston, all i hear is a faint clunk. But when i use my crane stock which is at 9.6v 3300mah it worked perfect, and there is no way i can fit this into the ready mag. BTW im running a m120 with a systema magnum if that helps. I can't figure out why this isnt working. The motor draws about 10amps i think and both batteries should be efficient i think. any ideas? __________________