Airsoft Canada - View Single Post

Syn · August 19th, 2007, 16:09

take a pic. Depends on where the crack is. You could try to brace the crack from inside with a strip of thin plastic and glue to reinforce it and so the crack does not get worse.

jb weld? hmm the package says it sticks some plastics so a 50/50 chance. I would try to glue from inside because glue on the outside is hard to sand down (esp jb weld) and also looks like shit, unless you spray paint it which is a whole other can of worms because you have to get the colour right or paint the whole part that has the crack.

edit:if the crack is tight and does not show I would just brace and glue from inside (if possible) and leave it.

edit2: anyone out there try ABS glue (for pipes) to fix a similar problem. I know abs and pvc glue are pretry strong because I used it at work and home.

August 19th, 2007, 16:09	#4
Syn Trader rating Join Date: Aug 2005 Location: Toronto	take a pic. Depends on where the crack is. You could try to brace the crack from inside with a strip of thin plastic and glue to reinforce it and so the crack does not get worse. jb weld? hmm the package says it sticks some plastics so a 50/50 chance. I would try to glue from inside because glue on the outside is hard to sand down (esp jb weld) and also looks like shit, unless you spray paint it which is a whole other can of worms because you have to get the colour right or paint the whole part that has the crack. edit:if the crack is tight and does not show I would just brace and glue from inside (if possible) and leave it. edit2: anyone out there try ABS glue (for pipes) to fix a similar problem. I know abs and pvc glue are pretry strong because I used it at work and home. __________________ Last edited by Syn; August 19th, 2007 at 16:17..