Airsoft Canada - View Single Post - KJ M9 Full Metal

Icebreaker · June 27th, 2007, 06:09

I just got a new KJ M9, and I noticed that if I leave the mag inside, pull the slide back, and release it, it will return to about 3mm from the original position. You can see that the back sticks out just a little. If I then remove the mag it will pop back into place. It doesn't do this if I pull the slide without the mag. Any suggestions?

June 27th, 2007, 06:09	#1
Icebreaker Trader rating Join Date: Dec 2001 Location: Montreal	KJ M9 Full Metal - Slide won't return completely forward I just got a new KJ M9, and I noticed that if I leave the mag inside, pull the slide back, and release it, it will return to about 3mm from the original position. You can see that the back sticks out just a little. If I then remove the mag it will pop back into place. It doesn't do this if I pull the slide without the mag. Any suggestions? __________________ ([12 + 144 + 20 + (3 * 4^(1/2))] / 7) + (5 * 11) = 9^2 + 0 Translation