[randas]

Ok here's the problem. My TM M16VN was acting strange, there would be delay when pulling the trigger before it fired, and it seemed to be having troubble cranking. Then it died completley. (not a battery problem) So I removed the motor and battery and connected them directley, motor spun fine, so the motor is good. Then I reconected the battery to the gun, and reconnected the motor to the wires, but left it (the motor) hanging out. Pulling the trigger dose not turn the motor, so the metch box is not jamed. I guess this a electric/wireing problem?

Any ideas?

Thanks!