Airsoft Canada - View Single Post - KSC Glock 17 problem, expels all gas in one shot

mirage13 · June 25th, 2006, 10:47

I've been looking to solve almost the same problem for a while now with my 26C.

It used to not fire at all, and just blow all the propane out on the first shot, and the slide would jam, regardless of firing mode. Since replacing the entire hammer assembly with one from a near-mint 18C, it works perfectly on semi auto.. however, on fullauto, it only manages to shoot a couple shots (if lucky.... usually it's only one shot), at which point the slide blows off the frame on the left side (I've noticed it's always the left side, the side that says G26C MIL SPEC) and all the gas expells.

Let me know if you manage to fix your problem, or if you find any useful information about it. I'm at the end of my string. :banghead:

Good luck, and thanks in advance:!:

EDIT: Short Vid of problem: http://media.putfile.com/26c-fullauto-prob

June 25th, 2006, 10:47	#9
mirage13 Trader rating Join Date: Mar 2005 Location: Toronto	I've been looking to solve almost the same problem for a while now with my 26C. It used to not fire at all, and just blow all the propane out on the first shot, and the slide would jam, regardless of firing mode. Since replacing the entire hammer assembly with one from a near-mint 18C, it works perfectly on semi auto.. however, on fullauto, it only manages to shoot a couple shots (if lucky.... usually it's only one shot), at which point the slide blows off the frame on the left side (I've noticed it's always the left side, the side that says G26C MIL SPEC) and all the gas expells. Let me know if you manage to fix your problem, or if you find any useful information about it. I'm at the end of my string. :banghead: Good luck, and thanks in advance:!: EDIT: Short Vid of problem: http://media.putfile.com/26c-fullauto-prob __________________ "And that's how, with a few minor modifications, you can turn one ordinary gun, into five guns." - Moe Sizlack