Quote:
|
Originally Posted by Kid
stock bushings/spring guide/tappet plate/air nozzle/hop-up system
Bushings, spring guide MUST be upgraded.
I recomend you get a 110m spring instead. 350-400FPS.
That will be fine. If you get the 130, you will spend hundreds on the first time upgrade, then more and more over time as things break.
That will not do, I highly recomend that you go with a 110m or a 120m ABSOLUTE max. Also, is the rule for semi only?
If you do decide to go with a 130, I recomend you do not go higher than 9.6v, replace all the upper mech parts, bushings too, and put in torque up gears, from Systema.
|
Thanks for your recommendation. And yes, we can go full auto, 50' plus. So the stock bushings & spring guide don't cut it? Also, does the stock spring guide have a bearing and is it metal?