Airsoft Canada - View Single Post - SHS 1-piece cylinder head for AK/ver.3

Sentenced2Burn · March 28th, 2016, 04:49

So long story short; I bought one of these: http://airsoftdepot.ca/catalog/produ...oducts_id=3682

Tried to drop it into my CYMA ver.3 gearbox; but the little "tab" on the cylinder head was in the way. No biggie, I decided to shear off the tab and attempt to re-fit it. The holes still have trouble lining up correctly; and the inner grooves on the cut-out window (where the cylinder typically sits) do not seem to line up very nicely.

Am I boned here, or should I keep attempting to modify this thing to fit? There's no returning it now, but I'd still like to get some sort of performance for my $30.

If anyone else has had experience with these single-piece cylinder sets from SHS, please feel free to weigh in. I'll throw up some pictures upon request.

March 28th, 2016, 04:49	#1
Sentenced2Burn Trader rating Join Date: Nov 2013	SHS 1-piece cylinder head for AK/ver.3 So long story short; I bought one of these: http://airsoftdepot.ca/catalog/produ...oducts_id=3682 Tried to drop it into my CYMA ver.3 gearbox; but the little "tab" on the cylinder head was in the way. No biggie, I decided to shear off the tab and attempt to re-fit it. The holes still have trouble lining up correctly; and the inner grooves on the cut-out window (where the cylinder typically sits) do not seem to line up very nicely. Am I boned here, or should I keep attempting to modify this thing to fit? There's no returning it now, but I'd still like to get some sort of performance for my $30. If anyone else has had experience with these single-piece cylinder sets from SHS, please feel free to weigh in. I'll throw up some pictures upon request. __________________ "World's laziest sniper"