|
You may want to consider putting a KJW slide on it. (won't cost much) At least you will be able to trust the slide with all the guts being KJW. So spend just a little more on it and it might be ok.
I worked on one last year and discovered that the manufacturuer employs the use of dirty screws. That means .........screws that are not meant to be removed by the customer. I took apart the slide to access the the cylinder head on one and discovered that crappy surprise. The slide ended up as scrap and could not be fixed.
I took it to a weapons tech friend of mine. He confirmed he could not fix it. The metal was too soft and the slide would have been ruined further anyway trying to remove the screw.
As mentioned by someone else ....... Get AV'd. You are very well connected on ASC with help and stuff.
And access to the classifieds. Lots of great stuff in there.
Good luck.
|