|
@pestobanana: meant .1mm heh sorry for the mis-info. I just checked the connections as you mentioned and it did it again. When I close the box with everything in place, and attach the motor to the connectors without the pistol grip on, the motor spins as it should. However, once I connect the motor to the gearbox, it fired about 5 shots (give or take when the trigger was pulled on full auto) then stopped when i let go of the trigger. I pulled the trigger again and nothing. Not getting the lockup any more which is a bonus i guess heh. I pushed the two contacts at the trigger assembly together further, but it doesnt seem to have made a difference. It seems that it may be a trigger assembly/sled and/or cutoff lever issue. Any dealings with this?
@lurking: double checked those motor connects and all is well. pinched them a bit just to be sure and they connect with no issue (or sign of being loose for that matter). Can you read my bit above and let me know what you think.
Thanks for the help gents. I will be heading to bed and pick this mess up again tomorrow haha.
Cheers,
Flarebrass
|