|
@Pestobanana:
I test each gear to get about a mm play using multiple shim guides online and then test them all together. They turn beautifully multiple times before stopping when they are together (finger flick).
The shim test was done with the bottom 4 screws in each time.
Motor height was adjusted multiple times then reverse gearbox shell adjusted to be the optimal height.
I will double check all my contact and connectors to be sure, but all seems well. Will confirm.
All I have is my phone on me at this time, so when I have a chance Ill try and make a video.
Thanks!
Flarebrass
|