Quote:
Originally Posted by Flarebrass
@pestobanana: So I had a few minutes last night and tried feeding one bb into the chamber to see if it took. It did not, and every time i shot it moved a little, but never actually went into the chamber. I am starting to think that this has to do with either the tappet plate spring or the nozzle is not in the tappet plate probably. I will check both of those when I get some time, but what other ideas may you have if both the mentioned are ok? Thanks again for your help.
Flarebrass
|
If the nozzle wasn't in the tappet plate the nozzle wouldn't retract. It has nothing to do with the spring because the spring pulls it forward, not backward. Try opening the gearbox and making sure the tappet plate isn't broken and using the original nozzle, it is probably too long.