Quote:
Originally Posted by e-luder
That could be a possible fix. But be careful. This is a destructive modification. Don't take too much off as you can't get back what you sand off.
The problem is a bit of hole and alignment between the frame hole and chassis hole. Some times, they are a bit misaligned. Alot of the Guarder frames I work on have this issue...
|
Quote:
Originally Posted by Danke
Take the slide off and work the lever. Make sure it's properly seated on the spring and not in backwards. Keep working it and give it a couple drops of lube where the metal and plastic contact.
If that doesn't work pull the lever out and deburr the inside of the slots it runs in.
|
thank you for the help guys.... I'll give things a try this weekend and see whats happening.
Edit: Just popped the slide off, went to take the lever out to see if I had it in the correct way and something "clicked" and now it's working perfect.
