Quote:
Originally Posted by Moonschlagen
Best option is to throw it away and buy a TM G17! But seriously, it sounds like the trigger mechanism is messing up. Make sure all the little springs are straight and not screwed up. That's what happens when you buy chinese clones.
|
What he said.
Quote:
|
Please post pictures of the underside of the slide and the top part of the lower receiver.
|
And what he said.
This maybe noob but basics come first before the complicated answers.
If your gun is not gassed up enough, your slide can't rack properly to feed the bbs into the feeding ramp. And make sure the spring on your loading nozzle is working properly. It's under the slide. Most times if the loading nozzle can't move, it won't chamber a bb.
For full-auto and firing pin, that's sounds like a sear and disconnector issue. Does your trigger reset to the firing position after the full auto thing? If not then your trigger bar is not resetting properly because its getting caught on the sear and the hammer housing. When this happens, it jams your sear so it can't lock onto the hammer which is connected to the valve knocker. Without the sear catching onto the hammer, the hammer will want to stay in the upright position. Now, if your slide blows the hammer back without it catching, it creates the full auto effect your talking abooooooooootttttt!
but i don't know If I can't see it. hence "what he said".