I have an ACM Eotech 557 and an ACM 3x Magnifier. the problem is that I can't get the reticule to sit in the middle when looking through the magnifier.
I am able to turn on of the screws so that it adjusts left and right, but I can't find anything that will let me adjust up and down. I got the reticule at the bottom middle.
I'm guessing that there must be a way to adjust this as it wouldn't make sense to have only one axis of adjustment. It also looks like the magnifier is slanted upward toward the front and there are springs located in the mount. This leads me to believe that there's someway to do this but for the life of me I can't figure it out.
Any help would me MUCH appreciated. Here are some pics for reference.
This pic shows that the magnifier sits at an angle. If you look at the right, you can kind of make out springs. There is also a metal post on the left. It almost looks like this is what is raising the magnifier at an angle, but I took the screw out below it and nothing gives.
The screw on the right adjusts the magnifier to the left/right.
On the right is the screw that seems to do nothing. I thought it somehow held up the metal post.
Not sure if this picture is of any use.
Looking from the user end of magnifier. The screw on the left seems to push the metal peg to adjust the left/right.
