Quote:
Originally Posted by RacingManiac
The black trigger is the modded one, the silver one is off my 3.9 WA SV. The rear tab has to be ground off, reshaped to shorten it so it doesn't bottom on the frame to stop it from firing. The front of the loop has to be reduced in height or else it'll bottom on the mag and stop it from firing. The trigger attachment is different from TM also to the top of the trigger has to be sanded down so it'll fit in a TM-sized grip.....
It works now....but much time could be saved by buying the right one....  |
Nice pics :P Anyway thanks for sharing
Hey another question I want to ask is have anyone used the steel trigger bows that ProG4 makes for the 1911? With the 1911 platform I find that the stock marui trigger bow is a tad too short and as such there is a ~0.5mm bit of slack on the trigger compared to the almost no slack on the TM hicapas.
I was wondering whether the steel trigger bows are a bit longer to remove the trigger slack and if they aren't; have anyone found a way to do so? I was thinking of supergluing a cut-up piece of credit card plastic the same length and width of the rear part of the trigger bow and from my initial testing (without the glue) it seems to work. I didn't superglue it at the end because I didn't like the looks of the DIY job.