Airsoft Canada - View Single Post

sebdark · May 19th, 2011, 22:15

Hi!

There are my gun...
Maruzen APS Type 96
PDI Cylinder Set VC
PDI 6.01 Inner Barrel
PDI Hop-up Chamber
PDI Barrel Spacer Set x2
PSS96 Zero Trigger
Spring M130 if I remenber
Firefly Bucking
I use (at the moment) 0.30g Madbull Precision BB

The problem I have is the screw (of the hop up adjustment) is tighted to max and the BB still to reach the sky after 30m. That made me unable to hit a target at 50m (150 feet). :banghead:

I heard I am supose to be able to hit a target of about 1 feet square at 50m with a sniper full upgraded like this one...

Help me! What should I change or adjust?
Edit: The left/right adjustement is fine it go in straight line its just the "sky" adjustment the problem...

Other point the Inner Barrel is REALLY hard to remove or put back in the outter barrel (friction) any way to made it easier?

May 19th, 2011, 22:15	#1
sebdark Trader rating Join Date: Feb 2009 Location: Baie-Comeau prov. of QC	PDI HOP UP problem APS Type 96 Hi! There are my gun... Maruzen APS Type 96 PDI Cylinder Set VC PDI 6.01 Inner Barrel PDI Hop-up Chamber PDI Barrel Spacer Set x2 PSS96 Zero Trigger Spring M130 if I remenber Firefly Bucking I use (at the moment) 0.30g Madbull Precision BB The problem I have is the screw (of the hop up adjustment) is tighted to max and the BB still to reach the sky after 30m. That made me unable to hit a target at 50m (150 feet). :banghead: I heard I am supose to be able to hit a target of about 1 feet square at 50m with a sniper full upgraded like this one... Help me! What should I change or adjust? Edit: The left/right adjustement is fine it go in straight line its just the "sky" adjustment the problem... Other point the Inner Barrel is REALLY hard to remove or put back in the outter barrel (friction) any way to made it easier? __________________ Escadron Fantôme de la Mort qui Tue avec du Feu pis des Explosions Last edited by sebdark; May 19th, 2011 at 22:16.. Reason: Un petit oublie