Airsoft Canada - View Single Post - PSG-1 decocking lever still functional after upgrades?

sushicake · September 27th, 2010, 13:38

You also have to remember that your PSG-1 only shoots semi, so each trigger pull is a full cycle of the gears thus resetting the spring. So you dont really need the spring release function, as all TM based guns dont have it, and work wonderfully without.

It will pull about 2-3mm of the spring, but that's just because the sector gear needs to pull the tappet plate back to load the next bb in.

Or it could just be your motor is stronger than the spring so when you do hit that decocking lever, the spring doesn't have enough strength to push against the motor.

September 27th, 2010, 13:38	#9
sushicake Trader rating Join Date: Dec 2008 Location: Markham, ON	You also have to remember that your PSG-1 only shoots semi, so each trigger pull is a full cycle of the gears thus resetting the spring. So you dont really need the spring release function, as all TM based guns dont have it, and work wonderfully without. It will pull about 2-3mm of the spring, but that's just because the sector gear needs to pull the tappet plate back to load the next bb in. Or it could just be your motor is stronger than the spring so when you do hit that decocking lever, the spring doesn't have enough strength to push against the motor. __________________ "Don't you know the first law of physics? Anything fun costs atleast $8" Last edited by sushicake; September 27th, 2010 at 13:40..