|
Switch from Safe right over to Full Auto...see if that gets things going again.
Try taking the motor out of the grip
- 2 screws on grip cap
- check that the wiring is still connected to motor (red +, black other)
You can get the motor out, hook back up the wires, plug in the battery and give the trigger a pull. If it spins it's not necessarily a wiring problem.
If it doesn't spin when you do that...check the wiring/pins in your connectors, the wire/fuse holder and the wiring/battery connector.
Try a different battery.
The 20A fuse is 20A for a reason....but that said, it should still shoot (if it's working) with a 35A fuse. If something did cause the motor to cook it might have done it before the 35A fuse would have blown...dunno (that's why fuses are typically lower 15A-20A).
After that...you've got to get into it.
|