|
the far right piece(disconnector) should trip the sear into releasing.
One thing to check is to see if the disconnector is freely moving in its slot. If it hangs under the sear after firing a shot the next time you press the trigger the hammer will be resetted but the disconnector won't be able to push the sear(when the trigger has properly reset itself, the order of things from the front of the gun to rear should be: stirrup, disconnect, sear, leaf spring). I've been modding my disconnect a little bit to make it less likely to hang up on the sear. You can also bend the right most prong of the leaf spring inward(towards the front of the gun) to put more pressure on the disconnect to reset itself. I find it though that makes the pull a bit more positive(but heavier).
|