Airsoft Canada - View Single Post

Conker · November 30th, 2009, 17:32

All 416 will have "problems" with front ends, since it's not designed the same as a standard M4.

If you want to swap the front end, why choose an HK416? They are (in airsoft) pretty much the same as an M4, except their front end and upper receiver are higher and has a continuous rail.

Internal parts are the usual V2 parts.

@Moretoasties: The bolt wasn't stuck open. It has a bolt lock feature. Just pull then release the bolt handle, it will close. Or, push on the handle and it will close too.

November 30th, 2009, 17:32	#20
Conker Trader rating Join Date: Jan 2007 Location: Canada / Ireland / USA	All 416 will have "problems" with front ends, since it's not designed the same as a standard M4. If you want to swap the front end, why choose an HK416? They are (in airsoft) pretty much the same as an M4, except their front end and upper receiver are higher and has a continuous rail. Internal parts are the usual V2 parts. @Moretoasties: The bolt wasn't stuck open. It has a bolt lock feature. Just pull then release the bolt handle, it will close. Or, push on the handle and it will close too. __________________ WTS: King Arms/Madbull Mk18 Mod1 - VFC Mk17 SCAR-H midcap mags, FDE - VFC Mk17 SCAR-H + PWS rail, FDE WTB/WTT: CSOR gear, BFG, Tyr, Crye, etc Last edited by Conker; November 30th, 2009 at 17:40..