New Best PRC-148 / MBITR replica- info from http://bb.power-dy.com: GEAR Discussion
 

This radio is made in china，a few info from http://bb.power-dy.com ,only the following attattachment info and photos.
Brand：united-star ，US
PRC-148 radio
Frequency：VHF 136~173.995MHz or
UHF 400~469.995MHz
volt：2000Ma 7.2V Li
channels：1^99
power：5W（high）/1w(low)
Batteries: rechargable
Accessories：short Antenna，Extension cable，long Antenna，molle system Fixed Buckle，Chargers......Official Product's plug will be U-283/U
Functions：
1. CTCSS Signaling
2. DCS signaling
3. Scan
4. Pairs of waiting
5. Call end tone
6. Low-power
7. 99 channel
8. Computer Programming
9. Channel name can be edited
10. Busy lock (BCLO)
11. Voice Launch (VOX)
12. Received Signal Strength Indicator
13. Battery indicator
14. 1750Hz audio launch
15. Wireline copy (write through data lines to the radio-frequency)
16. Emergency Alarm
17. Adjustable backlight brightness
18. Squelch Digital-conditioning
19. Can be voice-activated emission
20. Can be locked-channel mode
21. Scan channel list editing functions, namely, each channel can choose not to participate in scanning parameters

General Specifications
Frequency range VHF 136 ~ 173.995MHz
UHF 400 ~ 469.995MHz
Frequency stability 5PPm
Memory Channel 100 Ge
Antenna Impedance 50 Ohm
Volume
Weight
Emission targets
Output Power 5W (high-power mode) / 1W (low-power mode)
Adjustment method 16K0F3E (W) / 11K0F3E (N)
Maximum deviation 5KHz (W) / 2.5KHz (N)
Spurious Radiation ≤ 7uW
Audio features 6dB / octave
Emission current ≤ 2.4A (high) / ≤ 0.8A (low)
CTCSS / DCS offset 0.75KHz (W) / 0.375KHz (N)
Modulation Sensitivity 12mv
Modulation Distortion ≤ 5%
Receive indicator
Receiver sensitivity 123dBm (12dB SINAD)
Receiver bandwidth 5KHz (W) / 2.5KHz (N)
Audio Power 0.5W
Audio Distortion ≤ 10%
Blocking 85dB
Intermodulation 65dB
Adjacent Channel Selectivity 65dB
Spurious rejection 70dB

Dead link.

All buttons are working? the frecuency step is adjustable? which values? real steel headsets compatible without modifications? price? metal outer shell (looks plastic)?

The same size as the original product, new development and fabrication of liquid crystal display;All screws can be split body, not decoration;All buttons may be used, each button has a requirement function；Material with high strength plastic body；Prices differ depending on configuration，For example a long antenna、molle Buckle etc.

What about the frecuency jump/step? i need one almost with 6.25khz step...

also do you have a price range ?

I don‘t know the price exactly.but I have heard friends say it about >200,<300,USD

will it work with real military headsets?

that's seems interesting

Please carefully read my comment，hoho！“Official Product's plug will be U-283/U”.
That means it work with real military headsets,this is also My Points of Interest.I will forward more info from http://bb.power-dy.com

Any news on this one?

Link is dead.

Bumping this thread, since it looks like that

http://www.rsov.com/index.php?target...oduct_id=13013

Is the same product. Though the cost is pretty high, I must say it might be the working MBITR replica were waiting for... Based solely on pics, quality looks awesome.

I'm also looking into it. It's just the name 'United Star' that throws me off for some reason.

Btw, Spartan Airsoft has a working MBITR replica:
http://www.rhinoairsoft.com/details....-148-WR&cat=22

If quality is good, be sure i'll buy one! finally my Peltor Comtac II will work correctly with a good Peltor PTT ! :D

Wow very cool it looks like this will TX/RX on VHF and UHF.