Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   KWC Mini UZI Auto fire prob (https://airsoftcanada.com/showthread.php?t=91137)

Fantasyvoyager September 30th, 2009 21:47

KWC Mini UZI Auto fire prob
 
Hi, first post here in this section, I have a used Uzi shoots at 450fps semi (still shoots in semi) but it does not fire well in Full Auto mode, It will shoot 3 or 4 rounds full auto then it stops and hisses for a secound or so, if i cock the gun it fires another 3 or 4 rounds then does the same thing.
the seals on the mag look fine. Could it be a weak spring on the hammer? or maybe a bent pin? I donno, i've examined every peace, all looks as it should. As i said it fires very well in semi...



Anyhow any and all help would come in handy.
Thanks

Fantasyvoyager October 11th, 2009 17:33

I updated the symptoms
 
Article above describes all symptoms.

Fantasyvoyager October 12th, 2009 16:05

Solved !!
 
It turns out the Magazine is the problem, the gas release plunger is wonky , causeing it to vent gas. I'm going to buy more mags, and some parts.


All times are GMT -4. The time now is 01:25.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.