TM G18c AEP upgrades
 

i'm just wondering if i can install a 7.2v 500mah from the tm usp to my glock. also i found a number of upgrades available to the glock18c aep, but i have no idea what they do, so can you guys please explain what the parts do? i tried googling up the info but nothing shows up only reviews and sales come up.

-NINE BALL Hard Tappet Cam for Marui G18C Fixed
-NINE BALL Hard Piston Plus for Marui G18C / M93R Fixed
-NINE BALL Hard Piston for Marui G18C / M93R Fixed
-KM 6.04mm TN Extra Long Inner Barrel for Marui G18C Fixed ( 300mm )
-Smokeys Stock System for Marui G18C Fixed
-NINE BALL 6.03mm Custom Long Inner Barrel with Screw for Marui G18C Fixed and M93R Fixed
-NINE BALL Silencer Attachment System for NINE BALL Marui G18C Fixed Custom Long Inner Barrel
-NINE BALL Air-seal Nozzle Guide Set for Marui AEG G18C Fixed
-NINE BALL Dumper Piston Head-X for Marui G18C Fixed
-NINE BALL Dual Dumper for Marui G18C Fixed Cylinder Head
-NINE BALL Dumper Piston Head & Dual Dumper set for Marui G18C Fixed
-NINE BALL Hard Screw Set for Marui G18C & M93R Fixed Mecha Box
-NINE BALL Low Friction Metal Hole for Marui G18C Fixed
-NINE BALL Hard Tappet Plate for Marui G18C Fixed
-NINE BALL Hard Reversal Stop Latch for Marui G18C Fixed
-NINE BALL Magazine End with Lanyard Eyelet for Marui G18C Fixed
-NINE BALL Piston Head for Marui G18C Fixed
-NINE BALL Full Cylinder for Marui G18 Fixed
-NINE BALL Power Spring for Marui G18C Fixed / M93R Fixed / MP7A1
-KM TN Inner Barrel with Silencer Adapter for Marui G18C Fixed ( 200mm )
-KM 105mm TN Barrel for Marui G18C Fixed
-KM 130mm TN Barrel for Marui G18C Fixed with Silencer Adapter ( 14mm + )
-NINE BALL Bearing Axle Hole for Marui G18C Fixed

also whats the diff between pdi and nineball parts? which parts are recommended first to give me the most velocity and durability? thanks and hope to hear from you guys soon!

Andrew

Have you seen this: http://www.airsofthawaii.org/ballist...7/g18pdi.shtml

AEPs function the same way mechanically as AEGs, so to figure what does what, this will help: http://arniesairsoft.co.uk/?filnavn=...atisanaeg.html

thanks bro

Andrew

edit: but how do i know which company makes better parts if they both make the same part, for example nineball and pdi both make piston heads for the g18 aep how do i know which one is better? same with the cylinders, nineball has a full cylinder while pdi has a highspeed cylinder.

so is it possible to use the 7.2v 500mah battery for the usp on my g18c? what improvements will i see in the gun, more shots being fired than the 200mah one? what negative effects will it have on the gun?

Andrew

edit: couldnt find out if the usp aep battery works or not but i read how ppl recommend using the cyma version of the 7.2v micro battery it has about 450-500mah.

Marui sells 500mAh packs as well. It gives you more shots per charge, and a *slight* improvement in ROF.

However, you would require the proper charger for it. If your gun came with a 200mAh pack charger, then it can not be used with the 500mAh pack.

http://www.wgcshop.com/pcart/shopper.php?itm=TM-72-500M

thanks illusion

Andrew