custom g36c gearbox
 

Hi i want to build myself a entire new g36c gearbox i want it to shoot 400 fps so i would like to know what are your suggestion i found that hurricane and king arms are doing shell for the g36 which one do you recommend me? For the internal i have found that guarder are doing a full tune up kit are they good? do you have any other suggestion for the internal?
Thanks

http://www.wgcshop.com/pcart/shopper...GB-03_srch_g36
http://www.wgcshop.com/pcart/shopper...3_cat_Gearboxs
http://www.wgcshop.com/pcart/shopper...ts%20for%20AEG

the parts look pretty good:P espically the double o ring cylidner head. Any AEG should not go without one of those it helps airseal by 10 fold.

but for thegearboxes, not my field....i noticed that I purchased a CAG36C that was old and had the 2nd gearbox type of metal, and my friends who actually purchased a newer G36C had the 1st gearbox you listed that was darker...Since only AEG's can get better over the years i would assume the darker metal gearbox would be better.

systema full tune up kit, guarder gears are bad, hurricane 7mm V3 reinforced gearbox, guarder makes good shells too i've seen.

i have check for systema too but i didn't find any full tune up kit made for the g36 do you know if the kit for the g3 can work? and i have look everywhere and i dont seem to find some of the piece (trigger mecanism, the little plastic piece that cover the gear just behind the trigger and the plastic pin that hold the wire on the side of the gearbox) so i think i maybe better to just buy a new g36 gearbox and upgrade it what do you think?
Thanks

is your G36c right now a TM or a CA? and does it still have a gearbox in it?

must use V3 parts, you can buy a systema FTK for any V3 and just use your old cylinder and air nozzle, or you can buy the guarder FTK and buy systema torque up gears

ok thanks. The gun is a tm but i don't have the gearbox.

somebody know if the trigger unit of the g36 is special or if i can use a unit made for m16?
thanks

It uses a v3 trigger mechanism. An M16 one will not work.

You'll also need to find the safety cover block.

Honestly, you're better off getting a stock gearbox and just upgrading it.

ok do you happen to know were i can find those i have check the only store keeping them is wgc but they are out of stock and don't know when they gonna receive more.
Thanks

I don't. That's why I recommend to start with a stock gearbox.

sorry i mean the stock gearbox :P

From a stock G36C? :P

As far as I know, that's the only way you'll get one with all the associated parts...