Need people around Montreal with stock guns!
 

I have to make some instructions for the Mosfet switches I am selling, but I do not have acces to all the mechbox types.

I would need help from airsofters around here that would like to have a FREE Mosfet switch installed in their gun. If you want, I can remake the wiring of your gun at the same time, with some silicone wire (if you want it, I will have some wire for sale, ga 12 and 14,or bring your wire)

Right now I need to do the following mechbox:

V1 (Famas)
V2 (M4/M16 and such)
V3 (AK, G36)
V3 (AUG) Found
V7 (M14)

You can contact me by PM or e-mail at gawyn_rhuarc@hotmail.com

Hey Kos-Mos!
I have just mounted my mosfet and i'll be submitting pics tonight.

( aug - ver 3 gbx )

cheerz.

I will mail you my G&G M14 for this one Kos! Get on MSN and we can talk!

here is mine
http://images6.theimagehosting.com/mosfet.th.jpg

is the wiring good?

the spring is a ms120 sp

it doesn't work with a 1700 Mah 9.6 V nicad battery.
it does work with 4200 mah 10.8 v nimh battery
does it heat a lot? apparently...

i'll test shoot it tomorrow...

Should not heat up that much...

Very hard to see if evrything is alright on that picture... that is why I will be doing a step-by-step installation instruction for all the mechboxes I can find

Hazard, I am sometimes between work and sleep... but not much.

I will be on Saturday almost all day long

yeah, after more testing, it doesnt heat up that much, and the rof is better than before.

What about the ver.6 in a P90?

This is the mechbox I used to do my test. Takes about 5 mins to install in a V.6

Instuctions are already done for that mechbox... so I don't need to do it again. Thanks anyways!

what is a Mosfet switch?

I am in the mids of needing to rewire my famas. (finaly) The wires are zombie like if you know what I mean

A Mosfet is an electronic component that is used here as a High capacity power switch.

It takes the majority of the electric flow from the copper trigger switch and so reduce the overall internal resistance.

If you were closer I say I have a version 1 coming up soon(I got to change wires they been smelling crispy and they are old and not that high quality)