Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Doctor's Corner (https://airsoftcanada.com/forumdisplay.php?f=18)
-   -   Marushin Raging Bull Hopup Issue (https://airsoftcanada.com/showthread.php?t=37317)

Slyone April 14th, 2007 22:57

Marushin Raging Bull Hopup Issue
 
I recently purchased a Taurus Marushin Raging Bull, and about half my shots are pulling RIDICULOUSLY to the right. The (8mm) BBs practically make a 90 degree turn after they get a meter out of the barrel.

Any suggestions? In all honesty I'm not even positive where the hopup can be adjusted on this gun, but logically that would only effect the BBs having a topspin, not a side one.

baraccuda April 14th, 2007 23:02

well did you try and search and what was the price?

JDM350GT April 14th, 2007 23:43

there's somethin called the manual too u kno. and maybe u got somethin stuck in ur barrel or the shells that's makin the bbs go right. clean it up

Slyone April 15th, 2007 00:23

Quote:

Originally Posted by JDM350GT (Post 454449)
there's somethin called the manual too u kno. and maybe u got somethin stuck in ur barrel or the shells that's makin the bbs go right. clean it up

Purchased it off a classified here, didn't come with a manual. I'll remove and clean out the barrel just in case, thanks for the idea.

markedman April 15th, 2007 17:30

you can adjust the hop up by swinging the cylinder out and moving the slider on the inside of the frame (Just in front of the barrel) Most likely the inner barrel got turned a bit.

Moz April 15th, 2007 17:35

Quote:

Originally Posted by markedman (Post 454715)
you can adjust the hop up by swinging the cylinder out and moving the slider on the inside of the frame (Just in front of the barrel) Most likely the inner barrel got turned a bit.

seconded. I don't know how the hopup works on it but it is possible it got rotated.


All times are GMT -4. The time now is 12:59.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.