Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Airsoft Media (https://airsoftcanada.com/forumdisplay.php?f=30)
-   -   AK Mag Change - Fast and Clean (https://airsoftcanada.com/showthread.php?t=36755)

Blackthorne April 2nd, 2007 09:03

AK Mag Change - Fast and Clean
 
Sorry if this is a repost...

For those of us who struggle with AK mag changes (I did having learned on the M4 platform)...here is how you do it right, including function checks and inspection....

http://www.youtube.com/watch?v=-RgH6tHgyvY

Bissa April 2nd, 2007 09:20

wow... just wow that was so fast
i dont think moving that fast is possible much less necisary

Jimski April 2nd, 2007 10:23

mmmh a technique that doesn't involve the (airsoft/fragile) magazine getting thrown in the sand would be good too...

Blackthorne April 2nd, 2007 10:45

Quote:

Originally Posted by Jimski (Post 447441)
mmmh a technique that doesn't involve the (airsoft/fragile) magazine getting thrown in the sand would be good too...


I have yet to break a mag my treating them that way. (Star Low caps)

Shinjin_MC April 2nd, 2007 11:11

whats with that shimmy at the very start?

Brian McIlmoyle April 2nd, 2007 11:17

Quote:

Originally Posted by Shinjin_MC (Post 447452)
whats with that shimmy at the very start?


As the AK does not have a bolt hold open device, when it stops firing the 1st action is to check for a stoppage or hard extraction.. if you find the bolt carrier fully forward.. the next action is to change the magazine charge the weapon and continue firing.

Pip April 2nd, 2007 22:46

That was some sweet sh!t....yeah i drop my mags if i don't have the time to dump them...but once you know where you are putting things it can be pretty fast, especially if you are using STAR realcaps....lol...two/three bursts and your out...gotta be speedy. :) Great find!

Krieg April 2nd, 2007 22:51

... and the eyes remained on the enemy during the whole process!

Droc April 2nd, 2007 23:02

he looks exhausted after that.

Sturmur April 3rd, 2007 00:26

Polska!

dontask April 3rd, 2007 00:56

holy jesus
3 secs!!!

Lakonian April 3rd, 2007 00:58

Drill, Drill, and you guessed it! MORE DRILL!

Mysteryfish April 3rd, 2007 03:01

Honestly, the part of any reload I've found hardest is just getting the magazine from storage to hand.

I'd be really interested to see that from another angle. Does he "prime" his magazines? Near the end of a magazine, has he already opened a magazine pouch and gotten the end just a little out for grabbing?

Magpulls?

I hope this doesn't sound like criticism, because that's a helluva reload, but like I say, I would really appreciate more the "getting the magazine in your hand" part, because the "on the gun" stuff is alot easier to drill (I feel).

MadMorbius April 3rd, 2007 08:42

Quote:

Originally Posted by bissa (Post 447432)
wow... just wow that was so fast
i dont think moving that fast is possible much less necisary

Being on a two-way range might change your mind.

MadMorbius April 3rd, 2007 08:44

Quote:

Originally Posted by Mysteryfish (Post 448044)
Honestly, the part of any reload I've found hardest is just getting the magazine from storage to hand.

I'd be really interested to see that from another angle. Does he "prime" his magazines? Near the end of a magazine, has he already opened a magazine pouch and gotten the end just a little out for grabbing?

Magpulls?

I hope this doesn't sound like criticism, because that's a helluva reload, but like I say, I would really appreciate more the "getting the magazine in your hand" part, because the "on the gun" stuff is alot easier to drill (I feel).

Open pouch tops, and practice. Over and over and over again. It helps to orientate the mags in the pouches so that when you pull them out and flip them over, they're facing the right direction.


All times are GMT -4. The time now is 06:28.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.